Hallo Community, meine neue Anlage besteht aus einem Multi RS und einem 15kwh-Speicher von Gobel mit einem JK-BMS. Der RS steht durch das automatisch erkannte BMS auf “Externe Steuerung” und die Laderegelung wird durch die Vorgaben im BMS gesteuert. Das System soll so arbeiten, dass es den PV Str…

In the Grid settings of the RS6000 you can disable Feed-In.

If I deactivate the feed-in in the grid settings, the load on the other phases is no longer balanced. Then it draws energy from the grid.

How many Multi RSes do you have? From the first post one may believe that only one… Then why talking about other phases not being balanced ?

Do you have a Grid Meter and Support for it enabled in Victron connect? Does Limit Feed-In to 0 Change the behaviour?

[image] Alex Pescaru: How many Multi RSes do you have? From the first post one may believe that only one… Then why talking about other phases not being balanced ? @ Alex Pescaru It’s just one grid-connected system, and I want to use ESS and PowerAssist to balance the other three phases of m…

[image] aaxc: Do you have a Grid Meter and Support for it enabled in Victron connect? Does Limit Feed-In to 0 Change the behaviour? @ aaxc I connected the vm-3p75ct via VE.Can, and limiting it to 0 means that the load on the other phases is no longer balanced by the battery or PV. For this t…

[image] Peter: the RS must “feed” into one phase until the total load of all phases reaches the set grid setpoint. Maybe I am wrong, but are you sure this is how it supposed to work?.. Isn’t the RS supposed to compensate the phase on which is connected and not the other ones?

[image] Alex Pescaru: Maybe I am wrong, but are you sure this is how it supposed to work?.. Isn’t the RS supposed to compensate the phase on which is connected and not the other ones? @ Alex Pescaru Yes, I’m sure that’s how it’s supposed to work, and it does :wink: That’s the Power Assist f…

Ich habe hier mal einen Englisch-sprachigen Post erstellt. Vielleicht erreicht man da die Leute von Victron besser. [image] 1x Multi RS Solar 6000 zero feed-in on 3-Phase ESS not working Q&A and troubleshooting Hi, I have a 3-Phase Grid and only a single Mult…

Multi RS speist ungewünscht ins Netz ein

Other languages Deutschsprachiger Bereich

Raphael_Hofmann 9 August 2025 07:54 10

Ich habe hier mal einen Englisch-sprachigen Post erstellt.
Vielleicht erreicht man da die Leute von Victron besser.

Topic		Replies	Views
Feed_in not allowed behaviour in 3-phase grid connection, Multi RS Solar DIY beginner , ess , multi_rs , 3-phase	11	157	25 June 2026
1x Multi RS Solar 6000 zero feed-in on 3-Phase ESS not working Q&A and troubleshooting expert , multi_rs , 3-phase , cerbo_gx , feature-request	14	564	31 July 2026
Multi RS6000 Solar + RS450 + Pylontech -> kein DC Feedin bei Absorption Deutschsprachiger Bereich	52	1109	6 July 2026
Multi RS Solar charging from Grid at ess mode Q&A and troubleshooting diy , ess , multi_rs , 3-phase , cerbo_gx	51	864	12 January 2026
Multi RS 6000 Firmware bug limits grid feed in to 5000W in when using external current sensor DIY diy , ess , pv_inverter , multi_rs , 3-phase , cerbo_gx	65	2163	8 August 2026

Multi RS speist ungewünscht ins Netz ein

Related topics