It seems that with the new VC 6.30, the Multi RS inverter is not seen anymore on the Devices tab of VictronConnect… When you click on its installation, it says Connecting… goes to 40% and stays there for about 30 seconds. Then it shows the installation in the System tab, it shows the historic data…

Hi @alexpescaru I couldn’t reproduce the issue on the current firmware; I don’t have your combination of older versions to test unfortunately. The connection at 40% part at least is the same for me, but then I get all features after that.

Hi @guystewart Thanks for checking. Hi @Barbara Here it is… The VC 6.24 on my Android phone behaves the same. Up until yesterday it worked OK. The sole fact that up until yesterday with no modifications on my part the 6.24 worked and now it doesn’t, leads to believe that it’s something that ch…

Please @guystewart Don’t get me wrong, but I dare to ask this because I see it says “AU - Test” system in your video… Could you please, for a short time to downgrade the Multi RS firmware to 1.16 and see if you can reproduce the issue? Normally is should not take more than 5 minutes and the setti…

Hi @Barbara @guystewart and team Now it works! Thank you very much for your effort!

Hi developers… Again, today, it was not working… It seems, that after a while, the mqtt connection/daemon is terminated and when it’s starting again, it can’t connect. Relevant portion of the mqtt-rpc log looks like this below, something not allowing connections on port 1883. @4000000069a303a402…

Multi RS missing in VictronConnect after 6.30 update

Q&A and troubleshooting

guystewart (Guy Stewart (Victron Community Manager)) Split this topic February 27, 2026, 1:12pm 6

4 posts were split to a new topic: Multi RS - Do you need to upgrade through 1.27 to reach 1.28

Topic		Replies	Views
Multi RS - Do you need to upgrade through 1.27 to reach 1.28 Q&A and troubleshooting victronconnect , multi_rs	12	206	March 9, 2026
VictronConnect 6.21 & MultiRS issues DIY victronconnect , vrm , not-listed , cerbo-gx	1	97	April 3, 2026
VictronConnect 6.10 -> 6.12 (release) bugs Q&A and troubleshooting victronconnect , ess , professional , multi_rs	7	466	January 7, 2025
VictronConnect bug for Multi-RS? Q&A and troubleshooting victronconnect , beginner , pv-inverter , vrm , multi_rs	3	103	September 19, 2025
Multi RS AC input control stays connected to the grid Q&A and troubleshooting victronconnect , beginner , ess , vrm , multi_rs	2	84	April 16, 2025

Multi RS missing in VictronConnect after 6.30 update

Related topics