Monitoring System for Victron MPPT charge regulators

Q&A and troubleshooting
, ,
1

In the past I used MPPT 75 or similar for power supply systems at sea connecting a single charge regulator per panel to maximize the input current to the battery. The load is powered directly from the battery.

I want to monitor the current in/out of each panel (I have 4 panels with dfferent orientation in a buoy moving at sea).

Which device is avilable in the Victron family?

I’d like to have a sort of “data collector device” connected with each of the 4 charge regulators and this “data collector device” shall have

an ethernet interface with web software interface.

Please advice about how to get this solution with Victron device.

Daniele

2

Get the Cerbo GX and you can connect 3 smart or bluesolar MPPTs via VE.direct. For the 4th MPPT, get a VE.direct to USB connector, and you have all 4 connected.

The Cerbo GX has Ethernet and you can monitor all the data via VRM. (https://www.victronenergy.com/panel-systems-remote-monitoring/vrm)