[gui-v2 on raspberry pi 4] Apologies for the crappy lighting - this was late at night in my bus, and lights are well… bright. This is a 2GB Raspberry Pi 4 with a BTT TFT 70 display (effectively a clone of the official screen, connects via the ribbon cable, not hdmi) I gave up trying t…

What dit you use as blanking and dimming device in RpiDisplaySetup? I used those settings that dit work under gui-v1: Enter custom blanking and dimming devices (y/n)?: y enter blanking device (/sys/class/…): /sys/class/graphics/fb1/blank enter dimming device (/sys/class/…): /sys/class/backlight/r…

[image] night199uk: /opt/victronenergy/swupdate-scripts/set-feed.sh testing That is something you shouldn’t use, try /opt/victronenergy/swupdate-scripts/set-feed.sh candidateand try again.

[image] jeroen: /opt/victronenergy/swupdate-scripts/set-feed.sh candidate That is the right thing to do in v3.70~81! Thanks a lot to your replay and hint. I think the QT library version is not a problem anymore so with the latest beta it’s working great and no victron testing feed is needed …

[image] Blaukauz: it’s working great and no victron testing feed is needed anymore That was never needed and you shouldn’t use that. There are still issues with the older rpi’s, I guess it is HDMI related.

In the meantime a new beta update was releast v3.70~83. It works with that is well. Best way how to switch to gui-v2 at the moment (tested on RPI4 and RPI zero 2w): Update to latest beta…. /opt/victronenergy/swupdate-scripts/set-feed.sh candidate opkg update opkg install $(opkg list-upgradable …

I gave this a try on my Zero 2W, since I can just reimage it if things really mess up. Just have it for testing. Seems to work acceptably well. Though, I only have a GPS and a ruuvitag that it can pick up for input.

I tried to run on my RaspberryPi 2. No problems on install, but my boot screen stops on the following screen: [5D72FDD1-46EA-460A-86D4-835DA99AAF4A_4_5005_c] I checked the logs, and I see the following loop output: @40000000698fc7712e4701fc *** starting gui-v2 *** @40000000698fc7713a1aac04 Vict…

yah.. I need to upgrade my Raspberry Pi hardware.

[image] Blaukauz: /opt/victronenergy/swupdate-scripts/set-feed.sh candidate you need to run beta, or change this line /opt/victronenergy/swupdate-scripts/set-feed.sh candidateto /opt/victronenergy/swupdate-scripts/set-feed.sh release

I have gui-v2 working decently well on a raspberry pi 4. Here's how

Modifications

turbopropper 9 February 2026 07:16 11

Before updating… RPI5 and GUI V2 seems to be working. How about RPI4?

Venus OS v3.70~96 available for public testing

Topic		Replies	Views
Gui V2 on raspi kiosk mode New UI 350-new-ui , raspberry_pi , cerbo-gx	4	794	24 January 2025
Venus OS 3.6 and dbus-serialbattery or other mods Deutschsprachiger Bereich firmware_update	36	2641	21 March 2026
Gui-v2 cpu leistung browser Deutschsprachiger Bereich	40	510	23 February 2026
Stabiele versie Venus? Other languages beginner , raspberry_pi	10	129	19 February 2026
Fragen eines Einsteigers Deutschsprachiger Bereich	7	493	22 November 2024

I have gui-v2 working decently well on a raspberry pi 4. Here's how

Related topics