Hi
I see that you also have multiple Bluetooth devices in your setup. I currently have 18 Ruuvi Tags connected to one of my systems, and they have all been working perfectly without any issues.
I’m also using one of the USB Bluetooth adapters mentioned in this thread below on a 2m USB extension cable, and it’s working well for me:
(Known Good USB Bluetooth adapters? - #8 by nesswill)
While I am running the latest beta software (and ok on formal released software too), I haven’t encountered any problems with my Bluetooth devices so far. Could you let me know if your Cerbo GX is a MK1 or 2? I’m not sure if it makes a difference, but if we are running the same hardware and software, we should see similar results.
EDIT
Just a quick note regarding the sensor’s radio signal. Please keep in mind that obstructions such as brick walls or other dense materials could potentially interfere with the signal transmission to and from the sensor.
Additionally, other devices transmitting on similar frequencies might also cause interference.
Best regards,
Dave