How to add my BMS boards to Victron compatibility page?

Q&A and troubleshooting
, ,
1

Hi,

Hope this is correct place to post, I have been looking for a place to contact you, the old forum thread: Contact a moderator doesn’t seem to be available in the new forum.

I have a range of BMS communication boards that allow communication with Cerbo GX, made here in sunny Australia.

I was wonder what the process is to add the a link to my iBMS communication boards, to this page:
https://www.victronenergy.com/live/battery_compatibility:start#diy_self-build_oriented_bmses

Link to my boards:

Thanks for your help!

1 Like
2

Hi @Uksa007,

There are a couple of ways, the normal route is a request via one of the Victron sales managers where you primarily hope to distribute - Contact - Victron Energy

Ideally you already have some units in the field that are connected to VRM to show that they are working.

That Sales manager should also provide you with the Victron BMS-Can protocol specification and compliance checklists (if you don’t already have them).

3

Thanks Guy for info,

I distribute/ship worldwide, do you think the best option would be contact the Australian Sales manager given I’m located here?

Thanks again.

4

That would be the best place to start.