EV charger ns, 1 fase , 3 fase system

[M_Lange (Matthias Lange - DE)]

We had similar questions a while ago:

EVCS on Studer off-grid

Hello, I am a new user of the EV charging station, which I use on the Studer NEXT3 Off-Grid system with a low charging current in the range of 6 - 11 A. I use EVCS in manual mode. I cannot force the charging station to charge all 3 phases, although it is connected to three phases. I see a picture of a green car, the connection has 3P and charging 1P. I do not see the possibility of influencing it in the settings. I use the web interface, the app does not want to connect. I bought the charger bec…

EV Charger Limited to 4.9 kW Despite 7.3 kW Single-Phase Capability

Hello Victron Community, I’m seeking assistance with an issue in my system configuration. Here’s an overview: [Screenshot 2025-05-21 at 11.02.07 AM] PV System*: 7.92 kWp solar panels Inverters: Fronius Primo 8.2 kW Victron MultiPlus II 48/5000/70-50 Battery Storage: CYLAID LiFePO₄ 48 V, 100 Ah (~5.1 kWh) Monitoring: Victron Cerbo GX, Lynx Distributor EV Charger: Victron Energy 22 kW AC Charging Station, connected in single-phase mode Issue: First issue is that EV Charger in the last days…

As dognose wrote:

• check the wiring of the EVCS
• check what current the the charging cable can handle and if it’s 1p or 3p
• check what your car can handle; can it be charge with 3p?