Beta v3.51~3: missing AC input in new GUI V2 with grid meter ET112, no problem in classic UI

[mpvader (Matthijs Vader)]

Hi. @kocki yes, thats a known issue.

Best keep an eye on this thread:

Some failure with EM24 and GUI-V2 on v3.50~37 and 34 also now VRM Data is missing

As long as my Multiplus II 3 Phase system is on the Grid is shown nearly “correctly”. Since all my load is on the input side I would expect the AC Loads and my EVCS shown between Grid and Inverter [Screenshot 2024-10-22 232531] With Node Red I switch my Multiplus II to off, when my battery is on minimum SOC, my MPPT do not delivery enough solar and the Multiplus should not charge. This should minimize the standby power lose since I do not need the Multiplus when they should not charge or inv…