Battleborn 100amp hr Batteries (2)

[pwfarnell]

As Justin said, having an unmeasured draw is one possibility. The other is early synchronisation to 100%. See the FAQ page, topics 2 and 3 cover these if you have not seen them, you say you have already taken some advice.

Frequently asked questions and commonly encountered issues with DIY installs

There are a number of questions that get asked frequently on the community covering basic installation DIY and commonly encountered problems with operation after installation / setup. A number of topics have been written in the DIY category and these are linked below. If you have an installation question or operational problem have a look in these first. Often if you ask a question that is covered, you are likely to be pointed towards one of these FAQs as an answer. What fuse capacity or wirin…