Activating inverters via relay output - Hotkeys

[Gongbong]

Hi,

New to the Victron scene, I am currently switching from Renogy to Victron.

Currently I have two Renogy inverters a 1000w and 3000w, these are running on 2 x 200A Lithium batteries in parallel and charged by a 100:50 mppt and 450w solar panel.

I would like to be able to turn the inverters on or off using the inbuilt relay outputs and control them via a hotkey, is this possible.

Turning the inverters on via the Cerbo is easy, and I can set the relays to manual and successfully turn them on / off, but would like to know if there is some way to setup a hotkey via the Cerbo’s web interface so I don’t have to enter the menu each time to where the relay option is, I would prefer if a hotkey can be placed on the opening screen ?

I don’t have a touchscreen, I’m accessing the Cerbo via it’s web interface.

[owenb79 (Owen Buttigieg)]

If you swipe sideways on the gx device you get this screen where the relay can be operated.

[Gongbong]

Thanks for the reply Owen

I just found a link has popped up on VRM once I put the relays to manual.

It has appeared in the top right as two toggles.