WHERE can the specific threshold values for the Automatic Alarm Monitoring be found?
I don’ think these are configurable. What is a “low voltage” and “high voltage” is derived from the operational parameters.
Probably the settings in VEConfigure will impact that, as low/high voltage alerts are generated by the inverter, not by the gx. (Gx just reads it and passes that information on to VRM)
Alerts generated by any BMS itself are triggered by thresholds configured in the BMS as well.
I don’t want to change these values. I’m ONLY interessted for the real values. 
Ah, okay 
Well, that I don’t know unfortunately.
1 Like