Victron GX device firmware has been updated to v3.70. This release brings a greatly expanded switch pane with Node-RED virtual switches, improvements to GX Boat Page and E-drive integrations, cell level monitoring for Lynx Smart BMS NG, Garmin EmpirBus digital switching, Shelly smart device integrat…

Wow Victron have out done themselves with Shelly :+1:t5: but just a few issues one with Shelly it doesn’t carry the Shelly device name that is assigned to the Shelly device in the Shelly app I’ve got about 20 or more Shelly devices so other than device names that I’ve assigned in Shelly I have no id…

Do you have a third party mod loaded to make the Shelly visible (prior to official support)? If so, might be worth removing anything not part of the base OS. If you can clarify that, I am sure the team will look into it. But I would split this into a topic of its own, once confirmed.

Hi Nick I did back in the day but removed it possibly a year or more ago as it wasn’t that reliable, so went stock. This update is the only thing that reintegrated Shelly everything else went a good few firmwares ago. Thanks in advance PS anyway they could give use something to get rid of the old de…

Thanks, I will pass it along. If you can share the site ID from the VRM url in case someone needs to check.

Great thanks I’ve managed to delete it from the list so just displaying one instance of the EV charger VRM Portal - Victron Energy I do hope that at @guystewart or someone can enable the other CT’s of the VM-3P75CT to read other tech independently of each other as that CT is getting lonely :joy:

Running 3.66 3.70 gives Low battery warning (which does not go away). It’s a Can connection by a Victron cable (JK PB BMS) Have reverted to 3.66 which again works fine This was reported during the beta’s

You will need to be clear if any third party mods are in use. Serialbattery etc.

[image] Daza: enable the other CT’s of the VM-3P75CT to read other tech independently of each other as that CT is getting lonely Waiting for that myself, I use my old Carlo energy meter to monitor grid and some AC PV in the other channel, I’d love to replace it with the faster Victron meter, …

Another relatively minor issue. While the solar yield on overview and brief page on the previous version listed watts or amps based on the setting, it’s now stuck on watts regardless of the setting.

Venus 3.70 released

Q&A and troubleshooting

jeroen (Jeroen) Split this topic 27 February 2026 15:43 9

A post was split to a new topic: Venus v3.70 MFD integration app with Mixed(Ac in Watts, DC in amps)

Topic		Replies	Views
Venus OS v3.70 - Shelly support Q&A and troubleshooting expert , ekrano_gx	1	813	2 March 2026
VenusOS v3.70 Shelly integration only showing four shelly devices Q&A and troubleshooting diy , gx_device , cerbo-gx	9	360	21 March 2026
Venus OS 3.70 and Heatpump Q&A and troubleshooting vrm , professional , venus-os , energy_meter	5	218	17 March 2026
Venus OS / Remote Console stürzt ab / MK3 Version Update Warning Deutschsprachiger Bereich venus_os , raspberry_pi , remote_console , mk3	4	445	13 September 2024
Venus V3.60 Switch pane DIY diy , offgrid , gx_device	12	378	17 June 2025

Venus 3.70 released

Related topics