(v6.24) VictronConnect - Linux AppImage crashes in Linux. Checked in 2 versions: openSUSE TW and Ubuntu 25.10. However in Ubuntu it works longer: crashed on 1st start, now works ok, however not fully tested it yet. Crush dump on openSUSE TW: PID: 13208 (VictronConnect) Signal: 1…

Based on the stack trace, the fault is occurring within libQt6Core.so.6. Since AppImages bundle their own libraries in /tmp/.mount_…, this is often due to a conflict between the bundled Qt libraries and your system’s graphics drivers or Wayland/X11 environment.

According to the topics here it worked well with openSUSE TW on X11 previously: [image] VictronConnect appimage (linux @ QT6) VictronConnect beta Hi, yes i confirm that if you install “libgthread-2_0-0” on a fresh install off tumbleweed 20250515 Victron Conne…

Hmm, now works fine after reboot without any changes to the environment. May be some kernel upgrade or something. Will look more however. P.S. 2nd run - crash immediately. Log attached: VictronConnect.log (2,2 КБ) [image] bachete: env -u QT_QPA_PLATFORMTHEME ./VictronConnect-x86_64.AppImage -…

[image] bachete: So the reboot didn’t work? Yes, run successfully only once, now crashes on every start in openSUSE TW. Ubuntu version can’t connect to the device and even do not ask for a PIN which I had changed in mobile app BTW.

I have the latest suse TW. Bluez is installed on both Ubuntu and Suse.

I do have the same problem as documented here In the Manjaro community someone provided an older version (5.10.x) which is working. But that’s an older major release. Apart from that other cases are documented here in this forum as well. Seem to be a general problem with newer versions. As it’s a…

I’d put my VictronConnect.log above, can do it again: VictronConnect.log (2,2 КБ) coredumpctl info VictronConnect outputs the same dump as in my 1st post. --appimage-extract output: > ./VictronConnect-x86_64_v6.24.appimage --appimage-extract squashfs-root/.DirIcon squashfs-root/AppRun squashfs-ro…

If I run squashfs-root/AppRun I have more detailed core dump on openSUSE TW: PID: 14792 (VictronConnect) Signal: 11 (SEGV) Timestamp: Fri 2026-02-06 16:23:05 EET (7s ago) Command Line: ./squashfs-root//bin/VictronConnect Executable: ./squashfs-root/bin/VictronConnect …

[image] dru: Which interface are you trying to connect? WARN 2026-02-06T16:15:58.031 qt.dbus.integration: Could not connect "org.freedesktop.NetworkManager" to "stateChanged" WARN 2026-02-06T16:15:58.031 qt.dbus.integration: Could not connect "org.freedesktop.NetworkManager" to "connectivityC…

(v6.24) VictronConnect - Linux AppImage crashes in Linux

Modifications

AlekseyK January 28, 2026, 8:45am 3

According to the topics here it worked well with openSUSE TW on X11 previously:

Topic		Replies	Views
VictonConnect Linux AppImage broken, using missing shared Libraries Q&A and troubleshooting victronconnect , vrm , professional , arduino , victron_community	1	307	September 28, 2024
Victron Connect AppImage 6.10 and 6.11 refuse to start Q&A and troubleshooting victronconnect , beginner , campervan , bluetooth_low_energy	3	225	December 11, 2024
App Victron Connect not working / Victron Connect App funktioniert nicht Q&A and troubleshooting victronconnect , diy , vrm , multiplus-ii	41	648	October 14, 2025
#67 Verbindung zum BMS unterbrochen Deutschsprachiger Bereich	6	327	October 5, 2024
Victronconnect 6.3 unreliable for firmware updates DIY victronconnect , multiplus , professional	20	417	June 7, 2026

(v6.24) VictronConnect - Linux AppImage crashes in Linux

Related topics