Just a quick notice to let you know that the Victron GX integration has become part of the default Home Assistant 2026.5 installation, launching at :trophy: platinum quality! For more info see: Victron GX - Home Assistant and 2026.5: We're on the same frequency now 📡 - Home Assistant

Some exisitng discussion here as well: [image] Victron integration in Home Assistant Modifications Hey Tomer, isn’t the official non HACS version also missing the ability to use mosqitto and also the ability to specify the update frequency? Or did I miss someth…

We stopped the development of our own release in favour of supporting this one. And there is a direct line between Tomer and Victron, so this integration can be made as good as possible.

That’s great and glad to see the Dev getting the support/access. Great work to all involved

Very cool. I assume it is too early to see what people are doing with this? Had a quick look and it works, but updated much slower than the older hacs Victron MQTT integration. Possibly/probably something wrong on my end and will try again soon.

Hi, The old HACS version actually uses the same library that contains most of the functionality. So the new official integration is more or less the old HACS one, but then with some changes that were required by the Home Assistant developers. So I would not expect it to update more slowly than the …

The old one has a setting for update frequency. I just had a quick glance on the new one and did not find the same setting but could well have missed it. Will dig deeper when there is time. Thanks.

I would assume that the dev is using the HACS end more as beta/testing branch, as the HA version one really needs to be finished that said the Dev has been great with the implementation of this in HACS when they started and I’ve had no issues with it to be honest but I would rather the HA version wh…

Sadly, the HA guys still didn’t approve exposing the update frequency setting in the built-in integration ad this is breaking some policy they have. If you have any feedback why you would like to have it there as well I will be glad if you can add your comments to: Victron GX: Configurable debounce …

The Victron GX integration arrived in Home Assistant

Q&A and troubleshooting

Daza May 12, 2026, 7:58am 3

Yep did mention it here as well was wondering if it was a Victron official release but at least it’s acknowledged Home Assistant with Gx Touch - What are people doing for a single UI interface? - #10 by Daza

Topic		Replies	Views
Homeassistant "Victron GX modbusTCP integration" - Tipps und Tricks gesucht Deutschsprachiger Bereich	20	7827	June 29, 2025
Fehlende Entitäten in HomeAssistant nach Update auf Venus 3.70 Deutschsprachiger Bereich cerbo_gx	8	452	June 18, 2026
Update Frage allgemein Deutschsprachiger Bereich victronconnect	6	214	April 13, 2026
Victron Integrationen in Home Assistant und Sensoren Deutschsprachiger Bereich vrm , cerbo_gx	10	379	March 20, 2026
Allowing a Inverter Quattro 48/15000/200-2x100 to talk to other systems DIY beginner , offgrid , vrm , victron_community , quattro	14	200	January 9, 2026

The Victron GX integration arrived in Home Assistant

Related topics