I am looking at making a DC UPS type system for low voltage DC devices in my home.
I would like to be able to use the DC power supply to both charge a LiFePo battery and/or power the devices - so I am looking at separating the mains power supply from the battery charger.
It looks like the Orion-Tr DC-DC Charger can be used for this purpose:
However SmartSolar Charge Controller seems to be significantly cheaper - and have VE.bus connection for monitoring:
I don’t need MPPT (it will be a constant voltage), but is there any disadvantage to using a SmartSolar Charge Controller for this purpose?
A couple of things to consider. The Orion boosts voltage if required from say 12V to 14.4V, the MPPT does not. The MPPT needs an input voltage 5V higher than the output battery voltage to start working.
Thank you! That is really helpful. Hopefully I can cope with the power supply being 5v higher than the battery voltage. I am going to have some additional DC-DC converters after the battery.
Using a solar charger as anything other than a solar charger is not supported, and in most cases not a very good idea.
What is your end goal? I see reference to putting a power supply on the input, but what’s powering the power supply, exactly? If it’s an AC-to-DC power supply, then there’s no benefit to not just using a proper AC-to-DC charger to keep your batteries charged. If it’s a DC-DC power supply, then assuming there’s a battery on each side, a DC-DC charger would be the appropriate component to use, with the DC-DC charger connected directly to each battery (not connected to a battery on one side and a power supply on the other).