I have connected a flow meter to the digital input of a new cerbo gx, and configured as a pilse meter. The k factor for the meter is given as 230 for the flow rate of <1.5 litre/min, and 260 for >1.5 lpm
The mulitplier section of the device settings appears to be used to convert cm3 to litres etc.
I understand that the cerbo should recognise 230 pulses as registering 1 litre of flow, so how do I set the device with the k factor?
Then I will know the litres consumed, and have an accurate idea measure of how much water is left in the tank of my boat.