I recently paired a Ruuvi Sensor (Temp/relative humidity/barometer/motion) to Cerbo GX (with latest Venus Large software update v3.52). On the LEVELS screen > ENVIRONMENT, it displays Temp and RH but will not display Barometer value. My application is on a boat so this is a desired value. Can this be resolved? The CERBO is reading the value and is reported in other areas, ie, SETTINGS > DEVICE and through App on my Navico MFD. But, I would prefer (and far more convenient) if the value was displayed on the LEVELS screen. Thank you for any assistance.
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| Ruuvi tag show pressure on Cerbo GX touch screen and option to show digits for temperature | 2 | 278 | 4 July 2025 | |
| Display Ruuvi & N2K data on Cerbo Page | 0 | 160 | 14 September 2024 | |
| Cerbo GX Firmware 3.60 Ruuvi Sensors | 29 | 1427 | 25 June 2025 | |
| Feature request, please: Ruuvi Barometer and motion detection | 1 | 91 | 23 December 2025 | |
| Is there a less complicated way to broadcast Ruuvi sensor data onto NMEA 2000 than via SignalK | 2 | 81 | 23 August 2026 |