I have added maretron sensors to 6 tanks onboard and need to be able to see the tank names on my cerbo gx v3.41.touchscreen. The tanks have all been named on the maretron nmea sentences correctly according to maretron but are labeled generic fuel water etc on the cerbo.All the volumes are reading …

[image] Venus OS v3.80~25 available for public testing Venus OS beta testing Good day! A fresh new thread for v3.80 beta feedback. Change log below, and first please make yourself aware with the beta testing instructions: Instructions 1 of 3: Venus OS beta t…

I too am having problems naming tanks. I have two fuel tanks, two water tanks and black water tank being measured by a few different maretron products. All work well until I use a fluid pressure monitor to monitor two (or more) tanks. These monitors have six channels and as such can monitor six tank…

I’m struggling with a similar issue. For me, it seems I can set the custom name field for any tank measured with an analog sender but not for any tank measured with a N2K sender. Did either of you ever figure this out? Would love to have my tank names shown on my display. Fuel [4] is less descri…

Same kind of names here with RV-C tanks.

Yes, I’m using a Seelevel system integrating with the Seelevel Soul which uses RVC, it doesn’t let you label the tanks, but it does bring in the category. So for two waste tanks they must be grouped together in the tank screen. Also, it brought in Fuel Tanks, which I cannot hide so they show up ev…

Naming tanks

DIY

wes_wilson (Wes) 1 June 2026 01:37 6

Seems this may be fixed, or at least my version of the problem is fixed. I just applied the Beta and successfully named all four of my N2K tanks.

Topic		Replies	Views
Tank Labeling with Maretron FPM100 Q&A and troubleshooting marine , diy , nmea_2000_-_n2k , cerbo_gx	2	59	20 June 2026
NMEA2000 tank sensor CX5001 not shown DIY marine , diy , nmea_2000_-_n2k	20	570	22 May 2025
Custom names for tank level sensors Cerbo GX not showing on Touch 50 DIY diy , gx_device , cerbo_gx	5	147	7 August 2025
Sensors Cannot Be Renamed in CerboGX DIY diy , rv , gx_device , tank_monitor , cerbo_gx	1	118	28 June 2025
NMEA 2000 Tank Adaptor (YDTA-04) and Cerbo with OS 3.60 DIY marine , diy , nmea_2000_-_n2k , cerbo_gx	5	179	29 June 2025

Naming tanks

Related topics