Integration SMA in VRM (esp battery inverter)

DIY
, ,
1

Dear all,
I have extended an existing SMA setup through a new Victron installation. Basically:

  • SMA: PV inverter (Tripower)
  • SMA: Battery inverter for AC-coupled 1-phase battery (Sunnyboy Storage)
  • SMA: HomeManager2.0
  • Victron: DC-coupled battery system with 3x MP2 and respective LiFePo4 batteries
  • Victron: Cerbo-GX
  • EM24

Up until everything is working fine, I have the HomeManager2.0 and the EM24 in sequence (what needs to come first/closest to the grid here - the EM24???)

I managed to integrate the PV inverter well - all working. The battery inverter is however also recognized as a PV inverter and not as a battery, completely messing up the VRM dashboard. How can I fix that? Any ideas on how to properly integrate the AC-coupled battery through SunnyBoy Storage in the VRM?

Obviously because of this, the loading of the DC batteries is also messed up.

Would appreciate some help! Thank you!

2

I have exactly the same situation here, except that I use only one MP2.
On the Console it is showing me this:

grafik
grafik482×242 16.3 KB

In VRM its showing up like that:

grafik
grafik610×756 26.6 KB

The SunnyBoy is singlephase on L3 of the Loads and MP2 is on L1 (load) of the EM24.
The Meters are: Grid → EM24 → HomeManager → Loads

I do not really see what is currently generated and how full is the battery of the SunnyBoy.

Did you or someone else managed to get it work?

3

With that Setup it seems to work, even the DC-Load:

grafik
grafik574×734 26.1 KB

The only thing is, I do not see the SMA-Battery and no Idea how full it is