I’m in a location with extremely unstable grid (voltage swings, frequency dips, lots of noise). I’m running a split-phase setup: 2× Multiplus II 12/3000 (split phase) 1× SmartSolar 150/70 MPPT 480Ah LiFePO₄ battery Cerbo + GX 1.5 HP well pump (requires soft start or transformer – not running it…

With really bad connections we just have the system full time inverting. Whats the point of having the rubbish grid in your loads? Then use a separate inverter for charging when needed with some simple programming. are you runnjng ESS assistant or just ac ignore? When connecting to bad grid you a…

[image] lxonline: Then use a separate inverter for charging when needed with some simple programming. This. Just forget trying to stabilise something that poor. Find a way to charge your batteries with the grid through a separate charger.

The best example of an unstable grid… :sweat_smile: [image] Mountain cabin in Romania Show us your system 3 x Quattro 15KVA 1 x Tauro ECO 50kw (limited to 1:1 ratio) 50KW - Canadian Solar 440W N-type panels 30kw LiFePO4 storage (Pytes V5 heated units, capac…

Yes exactly, an Eltek Flatpack 2 48/2000 or so could work well.

How do you deal with really unstable grid power with a Victron system?

Q&A and troubleshooting

Netrange (Steffen) 29 November 2025 18:05 4

The best example of an unstable grid…

Topic		Replies	Views
Disconnecting From Grid DIY beginner , mppt_controllers	14	538	1 September 2025
Problem switching from grid to inverter with weak ac DIY diy , multiplus-ii	4	88	24 March 2026
Victron powered house + Man-cave-workshop issue Q&A and troubleshooting diy , offgrid , pv_inverter , multiplus-ii , fronius , 3-phase , cerbo_gx	32	732	11 December 2025
Adding a battery to existing grid tied system DIY beginner , rv , parallel , domestic , lithium_battery , multiplus-ii	32	1068	20 October 2025
Issues with Victron System feeding into a UPS DIY beginner , pv_inverter , multiplus-ii	3	88	7 May 2026

How do you deal with really unstable grid power with a Victron system?

Related topics