Generator input (AC-IN) not being accepted in 48V M-S dual Inverter setup

[Ludo]

It should be somewhere in the manual…

To be of any use with your 10kw setup, you’ll need at least a 6kw generator

Multiplus II 5000 drawing too much current from generator

Hello, New user here. I have a problem charging with Honda EU30is and Multiplus II 5000, 230V. I adjust the max allowable current in Cerbo all the way down to 6A, however the Multiplus exceeds the max output of the generator within a few seconds after the charging session starts, and it trips the generator breaker fuse. I watch the Cerbo/BMV700 reporting increasing load past 3000w before the fuse goes, so clearly the Multiplus is aware that it is overloading the generator, and still it is allow…

Don’t forget you have 2 !