Hi,
Documentation here:
describes how to configure “Single-phase ESS is a single inverter/charger” to “Total of all phases” , but this is taking only immediate at-the moment usage into account.
Is it possible to configure victron ESS to do hourly vector balancing ?
This is what grid meters are mandated to do in Poland. So they count power usage in full hours, i.e. from 10:00 to 11:00
Here is explanation of what I mean:
From 10:05 to 10:15 I use 7.2kW on phase L1.
My victron device connected on phase L2 would push it’s maximum, 2.4kW during that time trying to do vector balancing.
I would like it to output it’s maximum, 2.4kW for next 20 minutes - this way it would push back same amount I used, and balance my meter to 0kWh in the 10:00 to 11:00 range.
I have 3 phase grid connection.
I’m building on-grid ESS with folowing set:
Victron MultiPlus-II 48/3000/35-32 GX
Victron 3-Phase Energy Meter Smart Meter VM-3P75CT
All installed on 1 phase.