Cerbo to VE.Bus and VE.Can to 12V and 24V devices

I’m in the final part of fitting out quite a complex motor boat. We have some victron kit onboard, as per the image, along with a few other Victron DC/DC chargers (which sadly have no comms ports).
The main bits of (victron) kit are:
2 x Inverter Compact 24/1600
1 x Skylla 24/100
1 Skylla 12/70(3)

I think they would all be able to communicate with a Cerbo all OK (which will be connected to the onboard network switch).

BUT is this going to be OK with some of it on the 24V side and the Skylla 12/70 on the 12V side?
Planning on using a Cerbo-s powered from the 24V system.

The communication voltage levels are brought down to the correct/standard levels inside all devices, no matter their power voltage.
So, yes, it will be OK.

1 Like