Cerbo mit SoC abfrage

[lxonline (LX)]

@jakobtg

Einstellungen→Relais→Funktion und da die Auswahl Betterie-SOC anwählen mit den Parametern Einschalten 20%, Ausschlaten 30%

If you want to through the GX interface use the generator function for it.

Otherwise you will need to use NODE red.

Node Red help with designing Cerbo GX relay 1 for soc level for immersion

Hello, I need help with node red I have wired a contractor into relay one of the Cerbo GX. I would like it to close when the battery Soc gets above 90% and close when it gets to 80% and below. I would be grateful if someone could help. Many thanks