In this application note we learn that Cerbo GX can collect the SolarEdge information via Sunspec. I have tested and it works. Now, my SolarEdge has a battery and I collect data about it via MODBUS over TCP/IP. When I move the SolarEdge device ID from 1 to 126 I can’t get data about the battery any…

Hé, I have the same problem. In my case it is because I’m also trying to connect homey to my solar edge inverter. This app needs device ID.1. Do you already now if it is possible tot connect solar edge to our Cerbo GX true device ID.1?

So far I did not get a single response on this. You are the first one to show interest on it.

I think Arjan’s problem is the single connection limit in solaredge. I seem to get intermittent data from SE10K in my Cerbo GX. I suspect it gets a time-out of 2 minutes and drops the modbus connection. Any way besides wireshark to confirm this?

Recently SolarEdge has sent a firmware update for the batteries. I will try to reconfigure the system again to see if the addressing problem of LG MODBUS is solved. Only then I can see if Venus OS (on Cerbo) can collect and show all the information from the 2 SolarEdge I have.

Hello, would you please let us know if the problem was resolved? I have the same problem.

For those that are still willing to solve this problem, I got it working by implementing a modbus proxy that will translate the request from 126 to 1. The proxy is a stable Python module so called modbus-proxy. This allows you to connect to this proxy asking for any unity ID a having it to convert t…

Hi, that is a great news. Would you please let me know if it could be work on Raspberry PI (HA)? Have you used this GitHub - tiagocoutinho/modbus-proxy: Connect multiple clients to modbus devices ? Thanks in advance.

Yes, I am using the proxy you mention above. However, I have no idea if you can use HA for this. I am running it as a service on a VM that I have for several other things. I have installed it on a Python VENV and created a systemd service calling the proxy pointing to the place of my yaml configurat…

Cerbo GX to show SolarEdge info via Sunspec

Modifications

moacir (Moacir) 10 October 2025 16:10 7

No! I gave up on both, collecting the SolarEdge info from Victron and asking questions in this forum. This is something you will not be able to solve without development support and it is more like they are too busy doing other things.

Multiplus II with SolarEdge integration application note may cause damage

Topic		Replies	Views
Cebro GX integration with Solar Edge Inverter via RS485-2 port and SunSpec Q&A and troubleshooting beginner , dess , rs485 , solaredge , cerbo_gx	9	295	23 January 2026
SolarEdge data showing inconsistantly in GX DIY pv_inverter , cerbo_gx	3	112	11 May 2026
Overvoltage, Cerbo GX controlling SolarEdgePV, Sunspec: ‘Dynamic power limiting’ option not working Q&A and troubleshooting pv_inverter , professional , dess , solaredge , multiplus-ii , cerbo_gx , modbus	1	320	12 September 2025
Solaredge communication dropping every few minutes Q&A and troubleshooting vrm , multiplus-ii , cerbo_gx , solar_edge	293	9596	19 October 2026
Connecting Solaredge inverter to MultiplusII GX via RS 485 Modbus DIY diy , ess , solaredge , multiplus-ii	6	646	5 June 2025

Cerbo GX to show SolarEdge info via Sunspec

Related topics