Hi all,
I’m trying to read my SolarEdge PV inverter values through the Cerbo. I have found the modbus document and can read certain registers, but the registers that give the PV Energy for the phases (1046, 1048 and 1050) do not correspond with what I see in Node Red (see attached picture). I’ve tried all combinations of byte and wordswap, but nothing gives the same value as in NodeRed. What I need is the total energy produced by my solarEdge system.
Also register 1052 does not seem to be the total actual power. I’m getting a strange value for that one too.
Hope someone can help out here and point out the rookie mistake…
Thanks,
