Cerbo GX relay control of Smart BatteryProtect – officially supported?

[pwfarnell]

You can control the SBP remote terminals directly by a cerbo relay as the remote terminals will have a low current draw. If you wish to drove an external relay be aware of the issues in this FAQ.

Using inverter / MPPT / GX device programmable relays with higher current, inductive or capacitive loads

Many Victron products have programmable relays included which can be used to send signals between each other or to control small loads. These ae typically rated as for the Cerbo GX as DC up to 30 VDC: 6 A DC up to 70 VDC: 1 A AC: 125 VAC: 6 A There have been many reports within the community from people who have burnt out the contacts or welded the contacts closed in the programmable relays in their systems. This is often caused by connecting the relays to inappropriate loads, sometimes loa…