Hello All, I’m working on a boat system with: Two SmartSolar MPPT 100/30 Two Orion XS 12/12-50A Three SmartShunt 300A If I was to add a Cerbo GX MK2 with a GX Touch 70, can I successfully combine the seven VE.Direct connections? I have seen third party devices. Are they reliable? Thanks for yo…

[image] Connect more than three VE direct devices to a CERBO GX? DIY Also see this post to enable RS485 over a 4 port ftdi adapter (you need one rs485 for mcu board for each rs485 device) There are a few suggestions here.

Many of the DIY cables are not isolated and can cause errors due to ground loops in the system such as inaccurate voltage and current readings on a SmartShunt. Isolation between USB and the VE.Direct port is highly recommended. Besides the Victron cables, there is a 4-port USB adapter: [im…

Cerbo GX MK2 VE.Direct

DIY

lxonline (LX) 7 June 2026 10:51 2

There are a few suggestions here.

Topic		Replies	Views
Connect more than three VE direct devices to a CERBO GX? DIY marine , diy , gx_device , cerbo_gx	18	5765	14 July 2025
Additional VE-Direct ports on Cerbo GX Q&A and troubleshooting beginner , gx_device , cerbo_gx	1	114	28 February 2026
VE.Direct erweiterung Deutschsprachiger Bereich ve-direct , cerbo_gx	3	833	27 October 2025
Installing a Cerbo GX DIY marine , mppt_controllers , cerbo_gx	8	192	21 November 2025
Connecting more than three VE.DIRECT devices to a Cerbo GX Q&A and troubleshooting diy , domestic , mppt_controllers , cerbo_gx	5	1038	17 April 2025

Cerbo GX MK2 VE.Direct

Related topics