We are currently BETA-testing a much-requested feature in VRM: Linking your electric car to VRM. In this post, I’ll explain to you what this unlocks, and how you can get started on testing. Why would I link my EV to VRM? You are probably checking both your car manufacturer’s app as well as VRM wh…

Hello @Barbara , I have clicked around betavrm for quite some time and could not find the link. Looks like it is not yet discoverable from the Prefernces/Integrations. Finally I discovered your direct link in the forum (which is not for some reason present in the email the forum sends out) and aft…

Greate news, i am looking forward to a optimized Charging. I found a issue on the FORD SDK: [It appears wehn i press on the link for the Ford Cars.] Ulfilas

Hi Barbara, That sounds like a very interesting feature that could offer many possibilities in the future. Perhaps even improvements to consumption predictions in DESS. If the vehicle’s state of charge (SoC) falls below a certain level and the vehicle is nearby, it’s likely that y kWh will be charg…

Hi @jkoljo , Please make sure your site meets the requirements described at the top of the page: [image] All the best, Alex Imbrea

Hi @Ulfilas , We are checking this for Ford now. Thank you! All the best, Alex Imbrea

I was able to link my car when using my wife’s myChevy account. I have two factor authentication enabled on my account but not hers. Could two factor authentication be the issue?

I don’t know if you made changes or if I just refreshed betaVRM more often. Now I could connect my car successfully even not having an original Victron EV-Charger. Are there any plans to control third party wallboxes for example via eebus? Like evcc?

Hi again @Ulfilas , We looked into it and Ford requires the linking to be done from a mobile app, while having Bluetooth enabled. For now, we will remove Ford from the list of supported brands and add it back once we know it works well. Best regards, Alex Imbrea

BETA: Connect your Electrical Vehicle to VRM

Beta testing VRM beta

Mr.Orange 1 December 2025 15:57 8

I have a chevy Equinox EV with MyChevy app. When trying to link my car in the VRM integration process I get a request timed out error after trying to sign in to my Chevrolet account. I get the same message when using Google Chrome and Microsoft Edge.

Topic		Replies	Views
Myenergy Zappi wallbox integrating in Venus EVCS vrm , professional , ev_charger_ns , vehicles	0	163	22 August 2024
Victron VRM API Integration für Home Assistant Deutschsprachiger Bereich pv_inverter , vrm , battery-monitor , home_assistant , multiplus-ii	44	2253	28 April 2026
Get EV Consumption data from VRM API via Node Red EVCS diy , evcs , vrm , node-red , victron_community	2	267	15 November 2024
EVCS disappearing from console and VRM EVCS vrm , cerbo_gx	3	108	25 February 2026
VRM no longer functioning - (Optus Australia users) Q&A and troubleshooting victronconnect , diy , vrm , easysolar_all-in-one	36	844	29 April 2026

BETA: Connect your Electrical Vehicle to VRM

Related topics