Hello! With the new version Venus OS 3.63 in the dvcc section of the maximum charging voltage no longer allows setting a decimal value. It is rounded to an integer. The problem persists in the latest beta version v3.70~13

Hey all, this has been fixed per v3.70~19 - please test and confirm? thanks!

hi, can you share a screenshot or photo? I can’t reproduce that.

I can also reproduce this, it’s only applicable to the new interface. [image] V3.63 and v3.70 issue setting DVCC max charge voltage? Venus OS beta testing

I have reproduced this defaulting to no decimals using remote console on a phone but when using the Touch 50 it works properly. Both gui2.

On the classic UI everything works perfectly. The problem is only on the New UI.

Hi all, noted - thanks. We’ll fix this urgently

I tried in the classic ui and it worked and after setting it to a decimal not 0 I can also use decimals in the new interface. But when I set a decimal of 0 I can’t set another decimal afterwards in the new interface.

I have the same issue in the Battery Bank settings for the Lynx Shunt also. Setting charged voltage is rounded to an integer, the same for tail current.

Version 3.70 ~ 15 installed RS Multi, single phase Bug: in VRM / Remote Console / System Setup / Charge Control / Maximum Charge Voltage the possibility to increment or decrease the voltage by 0.1V or fractional voltage is completely ignored when saved. If you set it to 54,8V when you hit save, i…

Welcome to community @dorin and thanks for the report! Noted. Will be fixed urgently

Hello everyone, i updated from version V3.60 to version V3.63. In version V3.63, the maximum charge voltage setting in the DVCC menu is rounded to whole volts. 100mV increments can no longer be set. The same problem still exists with version 3.70-15. Regards, David

V3.63 and v3.70 issue setting DVCC max charge voltage?

Beta testing Venus OS beta testing

ADT (Atelierul de Tehnologii) 18 July 2025 08:41 3

Topic		Replies	Views
Cerbo DVCC Ladekontrolle Spannung nur noch in 1 Volt schritten einstellbar Other languages cerbo_gx	3	76	21 July 2025
Cerbo GX V3.63 charge control fractionals not working Q&A and troubleshooting gx_device , cerbo_gx	1	88	27 July 2025
Ladespannung lässt sich im DVCC nicht ändern Deutschsprachiger Bereich	3	115	25 July 2025
Venus OS v3.70 - MPPT 150/100 VE.Can with DC-side export enabled suddenly stops charging DIY diy , mppt_controllers , cerbo_gx	44	709	26 March 2026
Dyness SOC with Voltage cap in dvcc DIY	25	392	16 April 2026

V3.63 and v3.70 issue setting DVCC max charge voltage?

Related topics