I have connected victron to solaredge using modbus TCP (sunspec) and in nodered (Large firmware) if I read for example error or status “connected” it still says (connected) even on the cerbogx console I see that solaredge is disconnected, does anyone know where the problem could be?

Yip. Solaredge is the problem. [image] Solaredge communication dropping every few minutes Q&A and troubleshooting Have 4.24.25 & V3.80~ running in my home since 8.May, no communication drop. Only the daily SE reboot causes a <1min “no update” but after this ev…

[image] M4jkl: error or status Which node are you using? Which SE firmware? Which VenusOS version? (The “connected” status could not be retrieved.) I’m using the “PV Inverter” node, SE 4.24.25, and Venus V 3.80~27 on a BBB. Yes, I can confirm that the PV inverter status returns a valid stat…

[image] Nick: Solaredge is the problem That is definitely not correct. SolarEdge was responsible for the loss of communication, but not for the issue described by M4jkl. Node-red node can not detect a loss of communication, but UI does.

SolarEdge NodeRed

Node-RED

nickdb (Nick) 3 June 2026 16:45 2

Yip. Solaredge is the problem.

Topic		Replies	Views
SolarEdge inverters intermittently disappearing from console/vrm in Venus os 3.66 VRM beta vrm , 3-phase	1	239	22 December 2025
NODE RED connection Issue on morning startup Node-RED beginner , vrm , node-red , cerbo_gx	1	99	14 May 2026
Multiple solar edge inverters DIY diy , ess , pv_inverter , solaredge , multiplus-ii , cerbo_gx	5	310	16 September 2025
Solaredge PV disappearing from VRM and Console Q&A and troubleshooting diy , ess , domestic , vrm , solaredge , multiplus-ii	1	215	20 December 2024
SolarEdge data showing inconsistantly in GX DIY pv_inverter , cerbo_gx	3	111	11 May 2026

SolarEdge NodeRed

Related topics