When connecting to the mqtt server in my EasySolar II with MQTT Explorer, no values are posted on N/(serial)/#, but as soon as I go to the VRM Portal, and looks at the Dashboard for my installation, messages starts flowing. It stays connected to the server, just no messages are send. After closing…

Just check the keepalive topic while vrm is open, you can copy/paste that payload. Mind to add the option to supress republish, else you are causing a full publish of every value with every keep alive. R/xxxxx/keepalive { “keepalive-options” : [“suppress-republish”] } (You probably only want a re…

MQTT stops publishing

Modifications

Mikey 26 March 2025 04:35 3

aaaah yes!

After adding “keepalive” to my google search the results returned were much more helpful.

MQTT not publishing on LAN (only serial)

Topic		Replies	Views
Help How to connect Cerbo GX and Home Assistant via MQTT..? Q&A and troubleshooting beginner , domestic , vrm , multiplus-ii , gx_device , cerbo-gx	3	543	1 May 2025
MQTT only shows Serial DIY beginner , multiplus , vrm , mqtt	6	443	25 June 2025
Problème d’actualisation des données Victron dans Home Assistant Communauté francophone vrm , cerbo-gx	4	95	13 July 2025
VRM Realtime stats broken DIY offgrid , vrm	7	192	15 October 2024
Validation data mqtt sur multiplus Communauté francophone vrm	0	33	15 October 2024

MQTT stops publishing

Related topics