MPPT 100/30 charger stop charging too soon. Solved, did factory reset

[lxonline (LX)]

@pp61

Absorption is set to 14.2

Does the battery voltage and the mppt voltage and what is recorded on the shunt reach this voltage? If it does then the battery is fully charging.

@pp61

Battery shunt

It might be that the settings are wrong on here.

Shunt / battery monitor not reading the correct SOC/ Amps, missing solar, decreasing daily or other misreading problems

This topic covers the SOC / Amps reported by BMV battery monitors, SmartShunts, Lynx BMSs and Lynx Shunts and will just be called shunt below. It is also assumed that the shunt is monitoring the domestic / house / cabin battery bank and not engine start / bow thruster / winch / caravan mover battery banks. The problems may be one or more of the following The SOC decreases daily despite the solar charger or other charger(s) working. The SOC increasing when discharging and falling when charging…