Help with PV charger report VRM portal

Hello,
I am new tho this community and my knowledge of Victron products is limited.
I set up a system in my caravan and I need a little help configuring the Venus O/S. See attached picture and list of system components. My problem is that i do not see incoming voltage/amperage from my solar charger. Did i miss a setting, do I need a plugin to my Venus O/S, or do I need to buy an additional component? Any help is greatly appreciated. See attached picture.
List of components:

4 x ECO-Worthy 130W panels
1 x Victron MPPT 150/45
1 x Victron Blue smart charger 20A
1 x Victron SmartShunt IP65/500
1 x Victron Smart Battery Sense Temperature and Voltage
1 x VE.Direct Bluetooth Smart Dongle
1 x V.E Direct USB/Serial
1 x Rasperry Pi Venus O/S
1 x JARXIOKE Inverter 3000W

You probably have figured this out by now, but without code modification, the usual connection to the pi drom the mppt is the ve direct to usb cable.