The situation: I have a Venus GX connected via Wifi to the local network and internet. An EM24 Ethernet is connected to the LAN port via direct cable between both devices. The GX receives the default gateway via DHCP over Wifi. On the LAN subnet there is no gateway (set to 0.0.0.0). In Venus OS…

hey @BartChampagne , this is fixed per Venus OS v3.60~83. It would be great if you can confirm. thanks!

Noted! We’ll look into this before deciding to release v3.60

For the record: this notification didn’t result from an active attempt to create the most bizarre and twisted setup :slight_smile: Basically it was just me grabbing spare parts off the shelf and connecting them in a strange but network-wise logical way to get a logging system at my parents’ place w…

No problem. Having an ethernet network without internet, and wanting to use wifi for internet, is something that is supported and should work.

Confirmed that it’s fixed ! My Venus GX is online via Wifi and has the EM24 Ethernet meter connected via the LAN port, and everything works.

Mine will still drop the VRM connection and fails firmware check after a reboot. #153 connection error & no route to host. Changing the IP address of the Ethernet port restores connectivity to VRM. The GUI is usable on my local LAN even though VRM is not functioning. v3.60~83.

That’s strange. Can you post screenshots of the IP configuration of Wifi and Ethernet please ?

Very strange. It’s been happening for quite a while now, on several devices. Changing the last octet in the Ethernet IP will remedy the problem, until another reboot or firmware update. I thought changing the IP to a link-local range solved it, but it was just the change of IP that make it happen…

Thanks Bart, it appears that did the trick. I think my post was before the changelog was in place.

Field Notice (bug?): routing change in Venus OS v3.60 beta

Beta testing Venus OS beta testing

BartChampagne (Bart Champagne) 29 May 2025 13:24 10

Set the Ethernet gateway IP to 0.0.0.0, as is stated in the v3.60~83 changelog.

After Venus v3.60 firmware update no longer connect to vrm portal

Topic		Replies	Views
After Venus v3.60 firmware update no longer connect to vrm portal DIY marine , beginner , vrm , ekrano_gx	20	684	13 June 2025
Nach Update auf 3.70 Deutschsprachiger Bereich vrm	2	179	26 February 2026
VRM nicht mehr erreichbar #152 Deutschsprachiger Bereich diy , vrm , gx_device	1	111	30 August 2025
VRM Portal nicht erreichbar Deutschsprachiger Bereich vrm , cerbo_gx	9	575	18 August 2025
Updated to Venus Os 3.62, no modifications, stuck at loading screen New UI diy , vrm , vebus , cerbo_gx	11	494	3 July 2025

Field Notice (bug?): routing change in Venus OS v3.60 beta

Related topics