I noticed this a few days ago. Today I was able to catch it. I use my station in Auto mode. Yesterday evening the car charged until the home battery SOC defined in the settings and went in LOW_SOC status, stopping the charge as it should. I didn’t took the cable out, I knew the sun today would ch…

btw, you can do something else in there, if charged state is reported by the EVCS, you can switch it to manual, trigger your CP relay, put it back in auto But you’ll have to add some kind of protection for when the vehicle is really charged.

first of all I will try trigger a CP relay on the state 21 - start charging. We will see. It’s easiest way.

Protection for what? I’m not following. If the car is charged, the car BMS won’t overcharge the battery.

Protection for never ending cycling. If relay will triger on the EVCS status “charged”, problem started when battery is really charged. Relay will trigger, but EVCS will report that battery is charged and relay will trigger again and again and again

So today I completly change EVCS to “special” version. I implemented two relays for multirelay function and also activated it and next I implemented shelly1 relay as switch for CP signal to wake up a Stellantis Opel car. All functions tested and working, so now I’m really happy with it. Hope it wi…

I made a video to document this issue: [Victron EVCS charging failure] It is clear that disconnecting of the CP line is the way to go. Victron, could you please make an official retrofit kit for this? You did a retrofit kit to make Multiplus II fan more silent, you could do this as we…

Just to make things clear, this is not an issue with the EVCS! This is just a workaround for vehicles that are not waking up based on CP signal, but are reacting just when disconnecting the cable (or by simulating it)

This is a problem of EVCS and this is a problem of Victron. Because the EVCS was not tested enough before the release. And Victron Energy did not test EV charging stations of other manufacturers enough. If Victron did that, Victron would know. The real world is not about “following specifications”…

EV charger not resuming charging

Q&A and troubleshooting EVCS

zedamoca 12 March 2025 11:36 81

ohh yes, gotcha

Topic		Replies	Views
Multiple EVCS keeps saying "charged" while EVs are not EVCS cerbo_gx	5	138	29 May 2026
EV Charger in Auto always starts with low excess solar EVCS diy , offgrid , pv_inverter , evcs , 3-phase	15	1134	30 September 2025
Ausstrecken Simulieren / CP Line VW 2017 EVCS evcs , ev_charging_station	0	41	5 June 2026
EVCS/ESS give priority to home battery charging over vehicle battery charging EVCS beginner , evcs , ev_charging_station	16	627	19 November 2024
EVCS drawing from grid in auto mode EVCS evcs , ev_charger , cerbo_gx	34	485	25 May 2026

EV charger not resuming charging

Related topics