I noticed this a few days ago. Today I was able to catch it. I use my station in Auto mode. Yesterday evening the car charged until the home battery SOC defined in the settings and went in LOW_SOC status, stopping the charge as it should. I didn’t took the cable out, I knew the sun today would ch…

No, don’t have to be sorry, let’s try to understand why it is switching, it shouldn’t do that. Can we simulate it?

Indeed in my example it changes to “charged” and in your example it changes to “wait for sun”. I will need to search my HA history to see if it happens also “waiting for sun”. Just an idea. Can your case happen because you don’t have enough power available in your inverter, and the charger stops t…

In auto mode I am using 1phase charging and I have 2 Multis on phase L1, so it is enough power for min. 6 A charging current… According to “Charged” state, I had these kind of problems with previous cars (Renault Zoe and VW ID.3). When I connected cable to car and charging was not started to some d…

Yes, displaying “charged” state on some vehicles, it’s expected. If the cable is plugged but not charging for a while, the vehicle powers down as many components as possible to reduce consumption. On some vehicles, that includes the computer that is taking care of Ac charging.

So in this case, the charger will never resume charging the next day. I guess this is not a particular case… Can’t we cycle the contactor, simulating an unplug / replug on every time the restart charging conditions are met? Or maybe some other solution… In my case I have several times, different s…

Hi @motylu . About your problem with “Waiting for start”. Do you have some automation in nodeRed or HA that is sending ‘Stop’ command or switch the modes? Because “Waiting for start” in auto mode charging or in “LOW SOC” appears after “Stop” command. If you able to simulate this situation again - we…

"Can’t we cycle the contactor, simulating an unplug / replug on every time the restart charging conditions are met? Or maybe some other solution… " No, unfortunately we can’t do anything from the EVCS side, sorry

[image] I even have this go and back changing states during hours long…

Hi @Nicolas and @Lpopescu , yes, I have some Node-RED automation related to EVCS. But only one is active and could made stop charging, but is is only in case of grid lost alarm and according to description of EVCS node, it could cause stop only if EVCS is in Manual mode… [Snímek obrazovky 2024-1…

EV charger not resuming charging

Q&A and troubleshooting EVCS

motylu 15 November 2024 12:51 12

It seems, that you have same problem as I have with EVCS data from Cerbo GX using MQTT, see https://community.victronenergy.com/t/evcs-repeated-occurrence-of-incorrect-values-over-mqtt/8360.

Topic		Replies	Views
EVCS disappearing from console and VRM EVCS vrm , cerbo-gx	3	96	25 February 2026
Multiple EVCS keeps saying "charged" while EVs are not EVCS cerbo-gx	4	98	28 October 2025
EV Charger in Auto always starts with low excess solar EVCS diy , offgrid , pv-inverter , evcs , 3-phase	15	1055	30 September 2025
EVCS/ESS give priority to home battery charging over vehicle battery charging EVCS beginner , evcs , ev_charging_station	17	561	3 December 2024
EVCS don't start - waiting for sun EVCS diy , ess , fronius	67	856	5 June 2025

EV charger not resuming charging

Related topics