I’ve been using the Boat Page for a few months now on my electric sailboat. I finally got around to mounting the GX display properly on my helm with a 3D printed flush mount bezel to fill the hole of my old Opus A3 display.
Sevcon Gen 4 size 6, with a Motenergy ME1616, and 560ah or LifePo4.
Here’s a quick video of the Boat Page in forward and reverse. I took it to roughly 2,300 RPM (my max RPM is 2,500).
I guess you don’t have a GPS receiver in the system then? 
I do, but I didn’t have my NMEA 2000 turned on. I was tied up to the dock when I took this video. I’ll flip it on next weekend
If you do, you’ll get a big speed number (mph) in the middle instead of power consumption… 
Here’s the Boat Page with my GPS turned on.
Oddly enough, current in Amps displayed on the right was initially displayed , but as soon as I turned the throttle on, it disappeared.iIt would reappear if I turned the motor and Cerbo GX screen off and then on, but would immediately disappear when I increased the throttle. I would really like it to display amps and watts (like shown in my video). Any idea why it is disappearing?
