https://www.victronenergy.com/live/victronconnect:beta
Phoenix & Blue Smart Chargers firmware version v3.61:
-
Applies to all 230V- as well as all 120-240V Phoenix Smart Charger models
-
Applies to all IP22, IP65 and IP67 Blue Smart Chargers produced after a hardware change made in production near the end of 2019. Chargers of the earlier generation can be updated to v3.25 and no further - VictronConnect App will then show a “this the latest version” note. Chargers of more recent hardware generations can be updated to v3.61. There are no plans to make firmware updates available for the earlier generation of chargers.
-
Firmware v3.61 change log:
-
Add Instant Readout
-
Fix low temperature Cut-Off (IP22 and IP43)
-
Add synchronized charging to IP43 230V
-
Time for fixed absorption can now be set to 0 on all chargers (disabling absorption)
-
Repeated absorption can now be disabled on all chargers (requires Victron Connect update)
-
Adaptive absorption time can now be set to 30 minutes on all chargers.
-
Tail current can be configured on all chargers
-
Add 30 seconds bluetooth enable option to BSC IP65 6-12V/1.1A since it has no mode button
-
Update PUK entry procedure when 30 seconds BT is configured
-