"AC Loads" position in the NEW UI "Overview" Dashboard

Q&A and troubleshooting New UI
, ,
1

I have almost all of my loads located at the Multiplus cluster (2 multiplus in parallel) “Essential Loads” output. But I have loads at the input of Multiplus cluster as well.

I have set:
System setup → Position of AC loads: “AC input & output”
ESS ->Self-consumption from battery as “All system loads”
but in the “Overview” of the “NEW UI”, both “AC Loads” and “Essential Loads” appears at the output of “Inverter Charger” cluster. In the “Classic UI” these “AC Loads” appears directly from Grid (it is my real case).

It is not the same:

image
image1315×733 170 KB

2

Im looking at this too - can you describe where the loads are in comparison to any external energy meter, and what kind of loads are they?

3

It seems you are already looking at the right place.

There is a document that shows all new features:

And one shows this:

image
image1312×802 145 KB

And your picture also shows “AC Loads” and “Critical/Essential Loads”