Multiple Smart Shunts for parallel battery banks

[chrigu]

Klauke has good information about the differences, theres two links in this post, but the whole thread is a good read

Problems with crimping 35mm2 lugs

I think the main issue is that theres not a uniform 35mm², theres several different standards for lugs. An overview between two commonly used, at least in germany, standards can be found at Klauke. To note there is, that they identify the correct crimping die not by cable cross section, they do it by a code stamped into the lug, KL16 for example. DIN compression cable lug or tubular cable lug | Klauke Issuu Reader Another issue is the cable diameter due to its stranding. A coarse stranded 35m…