New Products Image

New Products

New Victron Product - Lithium SuperPack Battery

Hello Victron Community,

I am trying out something new, and if it works, it could be a regular thing.

Victron is launching a new product, and in the spirit of the community I would like to give you all an opportunity to ask any questions that you might have.

This gives you a chance to learn about something first, and also helps us to improve the initial documentation with some of the things that people might like to know that we haven’t thought about yet.

The product is called the Lithium SuperPack battery.

The big difference between this range and our other ranges is an integrated BMS and safety switch. No additional components are needed as the internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Simple and safe.

The SuperPack range comes in 5 sizes – 20, 60, 100 and 200Ah at 12.8V, plus a 25.6V 50Ah.

They can be connected in parallel without limit. But not connected in series.

They are rated for 2,500 cycles to 80% depth of discharge at 25°C

Charge voltages, current capacities and full specifications are listed in the datasheet:,8V-&-25,6-Lithium-SuperPack-EN.pdf


So, are there any questions?

Guy Stewart (Victron Community Manager) asked
Al answered ·

13 Answers

Is a Quattro 2 Imminent

Planning to use a larger Quattro (8000 or 10000) with BYD Battery LVL 15.4kW. Given the introduction of the Multiplus 2, is the Quattro 2 also due for an upgrade. If so are there any planned dates?

OGRT asked
ejrossouw answered ·

1 Answer

Error 4 with or without shore in my Quatro 24/5000/120

Ac In 1 and 2 240v

Ac out 1 and 2 nothing

Float and absorption flashing in oposition of invertor on flasching too

Hansch asked
Rob Fijn answered ·

1 Answer

NRS Certificate South Africa

I require NRS Certificate for Victron Multiplus II 48V 5kw. For South Africa asked
Paul B answered ·

1 Answer

Difference between Multiplus II 3.000 and 3.000 GX

Hi there guys,

Anyone knows the difference between the multiplus II 35-32 and the new model multiplus II 48/3000/35-32 GX?


Thanks in advance,


energy_z asked
Daniel Toribio commented ·

1 Answer

CANvu GX & IO Extender: what if I need 5 meters between them?

Hello, Community Folk~

My application is on a "dry" cabin instead of a damp boat. The project will be 48v nominal on the battery side. First, I wish to know the length of the standard connection cable from the IO Extender to the CANvu display.

Next I wish to know if an extension cable is available--maybe I don't need five meters between the two units but kindly address the question as if I do. (I can't get in to measure for several weeks.) Acknowledged that energy to run the touch screen must run through the cable so I'm sure there's a limit relating to that.

If an extension cord is not available, can one splice the factory cable longer without major brain damage? How many wires & what approximate gauge? Clearly this would be my last resort but the splices would be in a dry location & I can solder fairly well.

Thanks in advance~

abrahamsolar asked
eliott commented ·

2 Answers

version smart battery protect

bonjour, j'ai acheté deux smart batterie protect, un 12v-24v 65a et 1 48v 100a pour protéger mes deux séries de batteries.

quand dans l'application on souhaite desactiver la charge, j'ai bien le message que la charge va etre desactivée mais en realité elle n'est jamais desactivée. ainsi donc une nuit, alors que j'avais activée la coupure a 48v paramatres preconfiguré n°8, la tension de mes batteries est descendue à 46.26v sur le logiciel, il y avait marqué charge desactivé mais aucune coupure n'etait efective entre les bornes du batteriy protect.

les 2 appareils semblent avoir le meme probleme. la version SMART etant une nouveauté, n'y a t'il pas un probleme?

unnovice asked
Paul B answered ·

1 Answer

8 Posts
27 Users

Topic Experts

0 Points