Node-RED Image


Raspbian oder VenusOS

Hallo Powerlovers ;) ,

komme leider nicht mehr weiter und hoffe hier ein paar Anregungen zu bekommen.

Hatte bisher folgendes Setup in meinem, in die Jahre gekommen Wohnmobil.

Raspberry Pi mit:

  • Raspbian
  • Node-Red
  • eine selbst gebastelte Gasflaschenwaage mit HX711 über die GPIOs (Node-Red)
  • Relais Steuerung meines Kompressors für Luftfederung über die GPIOs (Node-Red)
  • LED Steuerung über GPIOs (Node-Red)
  • RaspAp (Hotspot)
  • Huawei USB-LTE Stick

Nun hab ich mir den Victron SmartSolar Charger MPPT gegönnt und dachte ich könnte den problemlos über die USB Verbindung in Node-Red einbinden aber entweder finde ich nicht die passenden "Librarys“ um den Charger in Node-Red nutzen zu können oder es funktioniert nur über die Venus OS?

Nun habe ich Venus OS auf einer frische SD Karte installiert und der Charger wird sofort erkannt. Nun fehlen mir die folgenden Möglichkeiten die ich zuvor hatte.

Ist es möglich die folgenden Anwendungen in Venus OS zu realisieren?

  • eine selbst gebastelte Gasflaschenwaage mit HX711 über die GPIOs auszulesen?
  • Relais Steuerung meines Kompressors für Luftfederung über die GPIOs anzusteuern?
  • LED Steuerung über GPIOs zu steuern?
  • einen Hotspot zu generieren?
  • Huawei USB-LTE Stick Mobiles Internet über den Hotspot zu verteilen?

Bin über jeden Hinweis Link usw. dankbar

Power UP!


beatstreet asked
Jens Rephöhler answered ·

1 Answer

Two Multiplus II in series


I am working on installing a Multiplus II 48/5000 at my home, where I already have an on-grid photovoltaic inverter SMA Sunny Boy 4kW and I have some questions I haven't found answers anywhere:

1. Is it possible to install two Multiplus II inverters in series (one of them connected to the other critical loads output) with non-shared batteries? How should I configure them? That would enable me to add a new Multiplus II in the future with another new battery on grid-parallel mode connected to first Multiplus II critical loads output.

1.1 If 1. question is possible, should I configure second one to not exporting to grid? Or first one could use frequency shifting (or similar) to control how much energy could export the second one?

1.2 Continuation of 1.1 question. Would be possible to have SMA Sunny Boy 4kW connected to the same critical loads output than second Multiplus II, having both controlled by frequency shifting? Or that is not possible as maximum power would exceed Multiplus II maximum power?

It appears a similar configuration could be done by using CerboGX large firmware, to be able to use Node-red to control some inputs:
- first Multiplus II critical loads frequency (could be updated depending on first Multiplus II is able to receive more power from critical loads or it cannot accept many more
- first Multiplus II AC In grid status (availabe/not available)
And to be able to control some things:
- second Multiplus II power exportation limit, being configure to 0 power exporattion into second Multiplus II if grid on first Multiplus II is disconnected

I've seen some other questions about similar solutions, but they were trying to control batteries load between two Multiplus II at the same time at the same battery load. I'm not interested on that. What I'm looking for is to:
1. If second Multiplus II (with AC In connected to first Multiplus II critical loads AC OUT) has batteries fully loaded, then it will share power with the other one if the other requires it; if the other doesn't require it and external grid is connected, power could be exported to grid; and if the other doesn't require it and external grid is disconnected, 0 power export should be configured into second Multiplus II
2. If first Multiplus II (connected to grid and with second Multiplus II connected to it's critical loads AC OUT) has batteries fully loaded, if second Multiplus II requires power, first Multiplus II can provide that power as if it were coming from real grid

tcircuns asked

0 Answers

Expected traffic to the mqtt{1 to 128} server farm?

I am running Venus-large and have a fairly extensive Node-Red flow consisting of about 100 nodes. My router is reporting a permanent TCP/IP session with one of the mqtt{1 to 128} servers with constant traffic of just over 10 kbit/s upload and just under 1 kbit/s download. This seems high to me but maybe it's because of my 100-node flow. Is this level of traffic to be expected?

paulcooper asked
paulcooper answered ·

1 Answer

Click here to see questions for the Node-Red topic


Node-Red is awesome, super flexible and allows amazing customisation and control of your Victron system, but it can also be complicated and many possibilities are completely untested.

It is considered a modification and only to be used at your own risk.

Victron does not provide any official support for Node-Red, so please keep questions in the modifications space on the community (and not to your dealers or sales managers).

If you are experiencing system issues and need help, please turn off Node-red and return your GX to the supported factory state before seeking support beyond the Victron modifications community.

Click here to see all the community content that uses the Node-Red topic.

Thanks :)

Guy Stewart (Victron Community Manager) asked

0 Answers

86 Posts
69 Users

Topic Experts

130 Points
45 Points
Thomas Pfeifer
10 Points