# \#smart\_lithium **URL:** https://community.victronenergy.com/tag/smart-lithium/77.md [Latest](https://community.victronenergy.com/latest.md) · [Categories](https://community.victronenergy.com/categories.md) · [Tags](https://community.victronenergy.com/tags.md) --- ## [SmartLithium 330Ah deep-discharge recovery: is 0.5C essential](https://community.victronenergy.com/t/smartlithium-330ah-deep-discharge-recovery-is-0-5c-essential/63899)
**Author:** [@matthidinger](https://community.victronenergy.com/u/matthidinger)\ **Replies:** 1\ **Last updated:** [13 October 2026 07:34 UTC](https://community.victronenergy.com/t/smartlithium-330ah-deep-discharge-recovery-is-0-5c-essential/63899 "2026-10-13T07:34:15Z")
Unfortunately through a series of failures I’m trying to recover severely discharged SmartLithium 330Ah batteries on my boat, one battery at a time. Equipment: SmartLithium 330Ah, 12V system Victron PMP122200102 Multi… --- ## [Load output stuck OFF after LVD event, even with battery well above 'on' threshold](https://community.victronenergy.com/t/load-output-stuck-off-after-lvd-event-even-with-battery-well-above-on-threshold/61587)
**Author:** [@Joshfog](https://community.victronenergy.com/u/Joshfog)\ **Replies:** 1\ **Last updated:** [12 August 2026 19:10 UTC](https://community.victronenergy.com/t/load-output-stuck-off-after-lvd-event-even-with-battery-well-above-on-threshold/61587 "2026-08-12T19:10:34Z")
Anyone dealt with load output getting stuck OFF even when battery voltage is well above the “on” threshold? We manufacture solar lighting systems, and recently we switched our product line from AGM/Morningstar to LiFePO… --- ## [Deep Discharge](https://community.victronenergy.com/t/deep-discharge/60617)
**Author:** [@Kodiak](https://community.victronenergy.com/u/Kodiak)\ **Replies:** 6\ **Last updated:** [20 July 2026 13:45 UTC](https://community.victronenergy.com/t/deep-discharge/60617 "2026-07-20T13:45:53Z")
Hello, I put my rig inside for just a short time and I ‘thought’ that there was a battery protect mechanism in place. They went into ‘deep discharge’ and I can’t get them charged again with a generator of pulling it out… --- ## [SOK 12v/314 uneven discharging Multipluss II 12/3k](https://community.victronenergy.com/t/sok-12v-314-uneven-discharging-multipluss-ii-12-3k/59509)
**Author:** [@retmedic149](https://community.victronenergy.com/u/retmedic149)\ **Replies:** 10\ **Last updated:** [22 June 2026 12:30 UTC](https://community.victronenergy.com/t/sok-12v-314-uneven-discharging-multipluss-ii-12-3k/59509 "2026-06-22T12:30:43Z")
Hoping someone can assist me with this issue. This is a motorhome setup that we live in full-time. Have 2 Victron Multiplus 12v/3k inverters. 6 SOK 12v/314ah batteries. The batteries are daisy chained together with bat… --- ## [New Smart Lithium 12v 160Ah battery HQ No.?](https://community.victronenergy.com/t/new-smart-lithium-12v-160ah-battery-hq-no/59337)
**Author:** [@Imagist](https://community.victronenergy.com/u/Imagist)\ **Replies:** 8\ **Last updated:** [16 June 2026 18:28 UTC](https://community.victronenergy.com/t/new-smart-lithium-12v-160ah-battery-hq-no/59337 "2026-06-16T18:28:26Z")
Hi sorry slightly long first post but if you’ll bear with me you’ll see where I am going with this. I’ve just had what should be a brand new Victron Smart Lithium 12v 160Ah battery installed by a professional installe… --- ## [M8 data cable for Lynx BMS](https://community.victronenergy.com/t/m8-data-cable-for-lynx-bms/59311)
**Author:** [@Westbranch1](https://community.victronenergy.com/u/Westbranch1)\ **Replies:** 0\ **Last updated:** [15 June 2026 21:46 UTC](https://community.victronenergy.com/t/m8-data-cable-for-lynx-bms/59311 "2026-06-15T21:46:24Z")
Installing BAT512130620 LiFePO4 Battery 12.8V/300Ah NG - connecting to Lynx BMS NG Question 1) - what is the maximum length that I can extend the M8 BMS cable, can I use more than one extension cable to extend more that… --- ## [BMS 500 ng ATC and ATD not working](https://community.victronenergy.com/t/bms-500-ng-atc-and-atd-not-working/57458)
**Author:** [@PerB](https://community.victronenergy.com/u/PerB)\ **Replies:** 3\ **Last updated:** [11 May 2026 19:27 UTC](https://community.victronenergy.com/t/bms-500-ng-atc-and-atd-not-working/57458 "2026-05-11T19:27:35Z")
I have installed a system like shown in the picture (sorry for a messy diagram). The lead side is working as intended with the Cyrix CT. And also all Bluetooth VRM everything is connected and visible as it should … --- ## [Get volts but zero watts after disconnecting and reconnecting solar panels](https://community.victronenergy.com/t/get-volts-but-zero-watts-after-disconnecting-and-reconnecting-solar-panels/57616)
**Author:** [@pqknowlton](https://community.victronenergy.com/u/pqknowlton)\ **Replies:** 1\ **Last updated:** [5 May 2026 20:15 UTC](https://community.victronenergy.com/t/get-volts-but-zero-watts-after-disconnecting-and-reconnecting-solar-panels/57616 "2026-05-05T20:15:30Z")
I have 6 - 200w solar panels on my ketch with a Victron 150/35 smart solar charger connected to a 48v battery bank of 16 Eve LiFePo4 280a cells. I use a JK BMS to monitor and control the balancing and charging, etc. I ha… --- ## [Victron Smart Battery, actual Firmware changelog (v1.31)?](https://community.victronenergy.com/t/victron-smart-battery-actual-firmware-changelog-v1-31/56275)
**Author:** [@pv-bauer](https://community.victronenergy.com/u/pv-bauer)\ **Replies:** 0\ **Last updated:** [9 April 2026 19:38 UTC](https://community.victronenergy.com/t/victron-smart-battery-actual-firmware-changelog-v1-31/56275 "2026-04-09T19:38:10Z")
Hello, on the victron professional Website, the firmware changelog for Lithium Smart batteries endet with v1.28. Where can I get an actual changelog for v1.31? --- ## [Cellule n°8 lifpo4 bloquée à 3.48v mode équilibrage](https://community.victronenergy.com/t/cellule-n-8-lifpo4-bloquee-a-3-48v-mode-equilibrage/53538)
**Author:** [@Gwen](https://community.victronenergy.com/u/Gwen)\ **Replies:** 14\ **Last updated:** [1 April 2026 16:37 UTC](https://community.victronenergy.com/t/cellule-n-8-lifpo4-bloquee-a-3-48v-mode-equilibrage/53538 "2026-04-01T16:37:22Z")
Bonjour à vous, nouveau ici, je cherche une réponse sur un disfonctionnement d’une cellule de ma batterie. Elle bloque en mode Absorption à 3.48v, quand les autres cellules sont à 3.50/3.55v Sujet : 2 batterie Lifpo4 … --- ## [Smart Lithium Battery. Smart Shunt Not Needed w/OrionXS?](https://community.victronenergy.com/t/smart-lithium-battery-smart-shunt-not-needed-w-orionxs/55778)
**Author:** [@mycoleptodiscus](https://community.victronenergy.com/u/mycoleptodiscus)\ **Replies:** 2\ **Last updated:** [31 March 2026 10:42 UTC](https://community.victronenergy.com/t/smart-lithium-battery-smart-shunt-not-needed-w-orionxs/55778 "2026-03-31T10:42:12Z")
The LiFePO4 battery I’m getting has a smart battery management system and heater. It has an app that will give me state of charge via bluetooth and integrates with the Cerbo system. I’m assuming then I have no reason t… --- ## [Neuling in der VictronWelt](https://community.victronenergy.com/t/neuling-in-der-victronwelt/51127)
**Author:** [@mike80](https://community.victronenergy.com/u/mike80)\ **Replies:** 19\ **Last updated:** [29 March 2026 10:15 UTC](https://community.victronenergy.com/t/neuling-in-der-victronwelt/51127 "2026-03-29T10:15:19Z")
Hallo liebe Victron-Gemeinde, ich bin neu hier und hätte gerne ein paar sinnvolle Konfigurationsvorschläge zu meinem System. Mein System: 3 × MultiPlus II 5000/48 im 3-Phasen-Betrieb 2 × Smart Lithium LiFePO₄ 24 V… --- ## [Multiple Smart Shunts for parallel battery banks](https://community.victronenergy.com/t/multiple-smart-shunts-for-parallel-battery-banks/51342)
**Author:** [@Steve85737](https://community.victronenergy.com/u/Steve85737)\ **Replies:** 50\ **Last updated:** [15 March 2026 22:28 UTC](https://community.victronenergy.com/t/multiple-smart-shunts-for-parallel-battery-banks/51342 "2026-03-15T22:28:35Z")
I’ve searched extensively on the forum but can’t find anywhere this has been covered already. I have 6 Victron Lithium Smart 25.6V 200Ah batteries connected in 2S3P configuration for a 48V off-grid system. I’ve not bothe… --- ## [Why does my state of charge slowly drop over time](https://community.victronenergy.com/t/why-does-my-state-of-charge-slowly-drop-over-time/54342)
**Author:** [@Sunhawk777](https://community.victronenergy.com/u/Sunhawk777)\ **Replies:** 17\ **Last updated:** [9 March 2026 00:00 UTC](https://community.victronenergy.com/t/why-does-my-state-of-charge-slowly-drop-over-time/54342 "2026-03-09T00:00:00Z")
Hi all… new here…probably been talked about before, but I’m struggling to figure out why my SOC slowly keeps dropping over the course of a couple of weeks or so….. I have fiddled with settings A LOT but still can’t… --- ## [Is there actually a simple way to check battery health in Victron systems?](https://community.victronenergy.com/t/is-there-actually-a-simple-way-to-check-battery-health-in-victron-systems/54555)
**Author:** [@Mattias\_t](https://community.victronenergy.com/u/Mattias_t)\ **Replies:** 1\ **Last updated:** [8 March 2026 15:32 UTC](https://community.victronenergy.com/t/is-there-actually-a-simple-way-to-check-battery-health-in-victron-systems/54555 "2026-03-08T15:32:54Z")
If you have a Victron system complete with compoenents you want. Is there actually a simple way to check battery health in Victron systems? Next step from the initial thread: --- ## [Victron and dealer unresponsive on warranty claim](https://community.victronenergy.com/t/victron-and-dealer-unresponsive-on-warranty-claim/54341)
**Author:** [@jamesm](https://community.victronenergy.com/u/jamesm)\ **Replies:** 3\ **Last updated:** [5 March 2026 05:41 UTC](https://community.victronenergy.com/t/victron-and-dealer-unresponsive-on-warranty-claim/54341 "2026-03-05T05:41:31Z")
Purchased five (5) 12V/100Ah AGM Super Cycle from an authorized dealer of both my pleasure craft and Victron, ie: total installation was under dealer’s responsibility. Less than 6 months in use, 4 out of 5 batteries are … --- ## [Smart IP43 Ladegerät Ladekurve für LiFePo Versorger und 3A an die Starterbatterie BLEI ORION XS](https://community.victronenergy.com/t/smart-ip43-ladegerat-ladekurve-fur-lifepo-versorger-und-3a-an-die-starterbatterie-blei-orion-xs/53792)
**Author:** [@Jack42](https://community.victronenergy.com/u/Jack42)\ **Replies:** 1\ **Last updated:** [23 February 2026 22:19 UTC](https://community.victronenergy.com/t/smart-ip43-ladegerat-ladekurve-fur-lifepo-versorger-und-3a-an-die-starterbatterie-blei-orion-xs/53792 "2026-02-23T22:19:45Z")
Moin in die Fachgemeinde… Frage zum SMART IP43 12Volt Ladegerät Ich habe eine Starterbatterie Blei und eine LiFePo 300A Versorgerbatterie Die sollen geladen werden…:wink: Als Landstromanschluss meine IDEE Smart IP43… --- ## [Scheduled Charge Levels in ESS](https://community.victronenergy.com/t/scheduled-charge-levels-in-ess/52543)
**Author:** [@Stephen\_B](https://community.victronenergy.com/u/Stephen_B)\ **Replies:** 4\ **Last updated:** [31 January 2026 07:24 UTC](https://community.victronenergy.com/t/scheduled-charge-levels-in-ess/52543 "2026-01-31T07:24:44Z")
Good Day I am looking for and example of an ESS Charging Schedule that is used in South Africa. We have erratic power and I have just installed a complete Victron power solution. So I am trying to find the most effici… --- ## [Ng batteries series parallel bms](https://community.victronenergy.com/t/ng-batteries-series-parallel-bms/51985)
**Author:** [@One-Life](https://community.victronenergy.com/u/One-Life)\ **Replies:** 5\ **Last updated:** [27 January 2026 01:50 UTC](https://community.victronenergy.com/t/ng-batteries-series-parallel-bms/51985 "2026-01-27T01:50:41Z")
I have 4 200ah lithium NG batteries wired in series parallel for 24v system. How do I correctly setup BMS for -Number of batteries-Number in series-Number in parallel? I think it should be 4 batteries, 2 series, 2 paral… --- ## [Charger settings of mastervolt combimaster with Victron smart\_lithium](https://community.victronenergy.com/t/charger-settings-of-mastervolt-combimaster-with-victron-smart-lithium/51529)
**Author:** [@Allegrasv](https://community.victronenergy.com/u/Allegrasv)\ **Replies:** 1\ **Last updated:** [13 January 2026 19:51 UTC](https://community.victronenergy.com/t/charger-settings-of-mastervolt-combimaster-with-victron-smart-lithium/51529 "2026-01-13T19:51:32Z")
I’m integrating the inverter /charger mastervolt combimaster 12v/3000W-160 ah 120 unit with my new 300 ah lithium Victron battery. What charge characteristics do I select? I’ve set it mli setting for now as that seems t… --- ## [Replace balancingboard in smartlithium 200A](https://community.victronenergy.com/t/replace-balancingboard-in-smartlithium-200a/51275)
**Author:** [@BartBleeker](https://community.victronenergy.com/u/BartBleeker)\ **Replies:** 2\ **Last updated:** [7 January 2026 21:39 UTC](https://community.victronenergy.com/t/replace-balancingboard-in-smartlithium-200a/51275 "2026-01-07T21:39:56Z")
Does anybody has experience with replacing a balancingboard in a Smart Lithium? I have tried it but distroyed the board. In what order do I reconnect the different wires? I Have another board from a 200A battery but I … --- ## [Modbus for MPPT charge controller](https://community.victronenergy.com/t/modbus-for-mppt-charge-controller/51188)
**Author:** [@Blind2solar](https://community.victronenergy.com/u/Blind2solar)\ **Replies:** 2\ **Last updated:** [7 January 2026 15:01 UTC](https://community.victronenergy.com/t/modbus-for-mppt-charge-controller/51188 "2026-01-07T15:01:51Z")
I have a small control unit that I am powering with a 12Ah 12VDC LiFePo4 battery, a 20W 12VDC solar panel, and a Victron smart solar 100/15 charge controller. This project is on a tight budget. I would like to connect … --- ## [Najad 460 - SV Freya - House battery system upgrade](https://community.victronenergy.com/t/najad-460-sv-freya-house-battery-system-upgrade/50883)
**Author:** [@Doruk](https://community.victronenergy.com/u/Doruk)\ **Replies:** 0\ **Last updated:** [29 December 2025 19:07 UTC](https://community.victronenergy.com/t/najad-460-sv-freya-house-battery-system-upgrade/50883 "2025-12-29T19:07:47Z")
Hi community, Here’s one of the sailboat conversions I made in 2023. If you got any questions, please feel free to ask. I hope you enjoy :wink: The boat is a Najad 460 sailboat from 2007 24V house battery system upgra… --- ## [12v Orion Smart Split relay not charging](https://community.victronenergy.com/t/12v-orion-smart-split-relay-not-charging/50270)
**Author:** [@liam.w](https://community.victronenergy.com/u/liam.w)\ **Replies:** 0\ **Last updated:** [16 December 2025 10:41 UTC](https://community.victronenergy.com/t/12v-orion-smart-split-relay-not-charging/50270 "2025-12-16T10:41:10Z")
Hey guys, I recently replaced my leisure battery with a Lithium leisure battery, changed the settings in the app to match the battery and it won’t charge. I’ve charged my starter battery, and have no problems starting … --- ## [Großes Problem mit Akkuheizung und SmartAkkus](https://community.victronenergy.com/t/grosses-problem-mit-akkuheizung-und-smartakkus/48468)
**Author:** [@MandiNice](https://community.victronenergy.com/u/MandiNice)\ **Replies:** 23\ **Last updated:** [11 November 2025 20:50 UTC](https://community.victronenergy.com/t/grosses-problem-mit-akkuheizung-und-smartakkus/48468 "2025-11-11T20:50:44Z")
Hallo Freunde des blauen Stromes Um die Akkus auch unter 5°C laden zu können haben wir Heizfolien auf die Akkus geklebt. Links und Rechts je eine Folie mit 32W fast über die gesamte Fläche verteilt. Die Heizung schalt… --- ## [DVCC and CONTROL THROUGH BMS](https://community.victronenergy.com/t/dvcc-and-control-through-bms/48405)
**Author:** [@IvanFraraccio74](https://community.victronenergy.com/u/IvanFraraccio74)\ **Replies:** 1\ **Last updated:** [8 November 2025 22:56 UTC](https://community.victronenergy.com/t/dvcc-and-control-through-bms/48405 "2025-11-08T22:56:57Z")
Hello Hello everyone, I need help, I have a completely victron system on my camper except for the batteries and the bms. I chose to try 340ah gotion cells with BMS Daly and so far so good. The problem arises when DVCC an… --- ## [Bsc ip65 12/15 stops charging at 60-70% SoC](https://community.victronenergy.com/t/bsc-ip65-12-15-stops-charging-at-60-70-soc/48136)
**Author:** [@calicojack](https://community.victronenergy.com/u/calicojack)\ **Replies:** 1\ **Last updated:** [3 November 2025 03:53 UTC](https://community.victronenergy.com/t/bsc-ip65-12-15-stops-charging-at-60-70-soc/48136 "2025-11-03T03:53:05Z")
Discharged 2x100aH12v in parallel to nearly 0% SoC with charger disconnected… Reconnect and charger goes to Absorption when either battery between 60-70% SoC then stops charging both batteries in Standby according to th… --- ## [SmartSolar MPPT 100/50 battery settings to charge Ecoworthy 280Ah 12V batteries](https://community.victronenergy.com/t/smartsolar-mppt-100-50-battery-settings-to-charge-ecoworthy-280ah-12v-batteries/47026)
**Author:** [@hdrew724](https://community.victronenergy.com/u/hdrew724)\ **Replies:** 2\ **Last updated:** [15 October 2025 01:05 UTC](https://community.victronenergy.com/t/smartsolar-mppt-100-50-battery-settings-to-charge-ecoworthy-280ah-12v-batteries/47026 "2025-10-15T01:05:24Z")
Has anyone connected a Smartsolar MPPT 100/50 to Ecoworthy LifePO4 280Ah 12V batteries? If so, I am looking for the battery settings that worked for you. I reached out to Ecoworthy Support to ask them for their recommen… --- ## [Inverter schalten im italienischen Netz zu oft auf Akkubetrieb](https://community.victronenergy.com/t/inverter-schalten-im-italienischen-netz-zu-oft-auf-akkubetrieb/46598)
**Author:** [@MandiNice](https://community.victronenergy.com/u/MandiNice)\ **Replies:** 16\ **Last updated:** [11 October 2025 10:05 UTC](https://community.victronenergy.com/t/inverter-schalten-im-italienischen-netz-zu-oft-auf-akkubetrieb/46598 "2025-10-11T10:05:39Z")
Schönen guten Tag. Wie das Thema schon sagt : Inverter schalten im italienischen Netz zu oft auf Akkubetrieb Wir betrieben mehrere baugleiche Anlagen bestehende aus 3 MultiPlus II 3kVA im 3-Phasenbetrieb ( Victron LiF… --- ## [Periodic maintenance charge for balancing with generator auto start](https://community.victronenergy.com/t/periodic-maintenance-charge-for-balancing-with-generator-auto-start/46444)
**Author:** [@Sneeuwuil](https://community.victronenergy.com/u/Sneeuwuil)\ **Replies:** 3\ **Last updated:** [6 October 2025 21:01 UTC](https://community.victronenergy.com/t/periodic-maintenance-charge-for-balancing-with-generator-auto-start/46444 "2025-10-06T21:01:36Z")
Hi all, I have a battery bank of 6 strings of 2 Victron Smart LFP-200a batteries (not the NG ones) in series together with a Smart Lynx BMS. I use the generator auto start function of the Cerbo. They are fully cycled as… [Next page](https://community.victronenergy.com/tag/smart-lithium/77.md?match_all_tags=true&page=1&tags%5B%5D=smart_lithium)