# \#overload **URL:** https://community.victronenergy.com/tag/overload/279.md [Latest](https://community.victronenergy.com/latest.md) · [Categories](https://community.victronenergy.com/categories.md) · [Tags](https://community.victronenergy.com/tags.md) --- ## [Generator when connected causes a L1 overload alarm](https://community.victronenergy.com/t/generator-when-connected-causes-a-l1-overload-alarm/64486)
**Author:** [@timbaber](https://community.victronenergy.com/u/timbaber)\ **Replies:** 3\ **Last updated:** [28 October 2026 16:23 UTC](https://community.victronenergy.com/t/generator-when-connected-causes-a-l1-overload-alarm/64486 "2026-10-28T16:23:23Z")
Hi, I need assistance, my system is not accepting the generator fully and when it does the batteries don’t seem to be charging at full rate. my system consists of : 2x Victron multipluss 2 48v 500 / 70-50 running in Pa… --- ## [VRM Dashboard, Touch Display Power flow Dashboard Red Load Values](https://community.victronenergy.com/t/vrm-dashboard-touch-display-power-flow-dashboard-red-load-values/44062)
**Author:** [@PeakShaving](https://community.victronenergy.com/u/PeakShaving)\ **Replies:** 2\ **Last updated:** [21 August 2025 22:16 UTC](https://community.victronenergy.com/t/vrm-dashboard-touch-display-power-flow-dashboard-red-load-values/44062 "2025-08-21T22:16:33Z")
Hi just wondering if there is information anywhere on the new GUI power flow Dashboard via VRM or touch display. When the load values change from white values to red as below what is this supposed to represent? I presu… --- ## [Multiplus 12 | 3000 | 120 - 50 | 120V Overload Errors at ~2100W](https://community.victronenergy.com/t/multiplus-12-3000-120-50-120v-overload-errors-at-2100w/43700)
**Author:** [@mlbeecher68](https://community.victronenergy.com/u/mlbeecher68)\ **Replies:** 5\ **Last updated:** [18 August 2025 17:42 UTC](https://community.victronenergy.com/t/multiplus-12-3000-120-50-120v-overload-errors-at-2100w/43700 "2025-08-18T17:42:35Z")
I have a new install and everything seems to be working well except I am getting overload errors on the Multiplus 12 | 3000 | 120 - 50 | 120V with 600ah of LiFePO4 batteries. This happens when my Air Conditioner starts.… --- ## [Multiplus 12 | 3000 hits overload immediately when turning on](https://community.victronenergy.com/t/multiplus-12-3000-hits-overload-immediately-when-turning-on/38721)
**Author:** [@meyer73](https://community.victronenergy.com/u/meyer73)\ **Replies:** 3\ **Last updated:** [10 July 2025 15:02 UTC](https://community.victronenergy.com/t/multiplus-12-3000-hits-overload-immediately-when-turning-on/38721 "2025-07-10T15:02:07Z")
Hi, replaced my old inverter, batteries in an upgrade to my camper. The setup is 2 Battleborn 270ah batteries, Multiplus ii 12/3000 inverter, Lynx distributor. The inverter overloads the minute it is turned on. After … --- ## [Something wrong with the MPPT 75/15 / load output](https://community.victronenergy.com/t/something-wrong-with-the-mppt-75-15-load-output/37770)
**Author:** [@DerFischer](https://community.victronenergy.com/u/DerFischer)\ **Replies:** 4\ **Last updated:** [1 July 2025 22:10 UTC](https://community.victronenergy.com/t/something-wrong-with-the-mppt-75-15-load-output/37770 "2025-07-01T22:10:46Z")
Hello Victron Community I ve run into a few problems after i changed my 12 v battery to a 24v lifepo one. So far i had the Battery connected to the battery in of the MPPT. My Loads were connected to the load out of the… --- ## [Overload message after paralleling two MultiPlus Compact 12/2000/80-30 230V](https://community.victronenergy.com/t/overload-message-after-paralleling-two-multiplus-compact-12-2000-80-30-230v/30158)
**Author:** [@FClouston](https://community.victronenergy.com/u/FClouston)\ **Replies:** 0\ **Last updated:** [26 April 2025 01:21 UTC](https://community.victronenergy.com/t/overload-message-after-paralleling-two-multiplus-compact-12-2000-80-30-230v/30158 "2025-04-26T01:21:15Z")
After paralleling two MultiPlus using the VE Quick Configure with MK3-VE-Bus interface, the master unit made a loud rattling sound for one second then shut down with the red alarm led on. The GX-Touch displays a « conver… --- ## [How to solve an overload error on victron multiplus ii 48/3000va/35amps](https://community.victronenergy.com/t/how-to-solve-an-overload-error-on-victron-multiplus-ii-48-3000va-35amps/13402)
**Author:** [@Kamara.2477](https://community.victronenergy.com/u/Kamara.2477)\ **Replies:** 2\ **Last updated:** [29 November 2024 11:18 UTC](https://community.victronenergy.com/t/how-to-solve-an-overload-error-on-victron-multiplus-ii-48-3000va-35amps/13402 "2024-11-29T11:18:53Z")
how to solve an overload error on victron multiplus ii 48/3000va/35amps