# \#lynx\_shunt **URL:** https://community.victronenergy.com/tag/lynx-shunt/218.md [Latest](https://community.victronenergy.com/latest.md) · [Categories](https://community.victronenergy.com/categories.md) · [Tags](https://community.victronenergy.com/tags.md) --- ## [DVCC Setup and Shared Temperature Sense (STS)](https://community.victronenergy.com/t/dvcc-setup-and-shared-temperature-sense-sts/63398)
**Author:** [@Bah434x](https://community.victronenergy.com/u/Bah434x)\ **Replies:** 1\ **Last updated:** [1 October 2026 07:52 UTC](https://community.victronenergy.com/t/dvcc-setup-and-shared-temperature-sense-sts/63398 "2026-10-01T07:52:30Z")
I have been looking to enabling DVCC on my motorhome system. My setup is on screenshot below, all on latest software. I have 600w of sola, Battery is Fogstar Drift 608ah with internal BMS, heater and temp sensor. Not ne… --- ## [Fuses ... mostly](https://community.victronenergy.com/t/fuses-mostly/63343)
**Author:** [@Thomasson42](https://community.victronenergy.com/u/Thomasson42)\ **Replies:** 6\ **Last updated:** [30 September 2026 12:39 UTC](https://community.victronenergy.com/t/fuses-mostly/63343 "2026-09-30T12:39:48Z")
Hi I have multiple questions: I have Orion DC/DC 12/12-50 XS. I’ll have 25mm² cable (5-7m total length. DC/DC will probable be placed 5-6m cable length from car battery) connected to the Lynx Distributor with 80A MEGA… --- ## [Lynx BMS - Measure Start battery voltage](https://community.victronenergy.com/t/lynx-bms-measure-start-battery-voltage/32584)
**Author:** [@jannemag](https://community.victronenergy.com/u/jannemag)\ **Replies:** 5\ **Last updated:** [26 September 2026 08:59 UTC](https://community.victronenergy.com/t/lynx-bms-measure-start-battery-voltage/32584 "2026-09-26T08:59:17Z")
Hi, I have a 12V marine setup with a Lynx Smart BMS, Lithium Batteri Smart, MulitPlus II, DC/DC, Cerbo GX, GX Tuch and some other components. What I now realize is that I cannot measure the start battery (lead) from the… --- ## [Ĺynx 1000 no longer sends battery readings](https://community.victronenergy.com/t/lynx-1000-sendet-keine-batteriewerte-mehr/62049)
**Author:** [@Mani](https://community.victronenergy.com/u/Mani)\ **Replies:** 1\ **Last updated:** [25 August 2026 14:05 UTC](https://community.victronenergy.com/t/lynx-1000-sendet-keine-batteriewerte-mehr/62049 "2026-08-25T14:05:10Z")
Hello community, I’m suddenly no longer receiving any readings from the Lynx Shunt 1000. Only the battery voltage is now being displayed. The only things shown are the word “idle” and the current charging voltage. I have the Cerbo GX from… --- ## [Lynx Shunt throwing Low Voltage alarms consistently - can’t find low voltage](https://community.victronenergy.com/t/lynx-shunt-throwing-low-voltage-alarms-consistently-can-t-find-low-voltage/61666)
**Author:** [@TheClint](https://community.victronenergy.com/u/TheClint)\ **Replies:** 0\ **Last updated:** [14 August 2026 19:01 UTC](https://community.victronenergy.com/t/lynx-shunt-throwing-low-voltage-alarms-consistently-can-t-find-low-voltage/61666 "2026-08-14T19:01:30Z")
I’m helping a fellow boater with their boat. He has two lynx distributors connected to a lynx shunt. Bottom side for input of 4 314AH WattCycles in parallel, top side for output to MPPT, DC-DC. He had the DC-DC hooke… --- ## [Why does my lynx shunt show incorrect battery percentage](https://community.victronenergy.com/t/why-does-my-lynx-shunt-show-incorrect-battery-percentage/57713)
**Author:** [@Katie](https://community.victronenergy.com/u/Katie)\ **Replies:** 4\ **Last updated:** [8 May 2026 11:07 UTC](https://community.victronenergy.com/t/why-does-my-lynx-shunt-show-incorrect-battery-percentage/57713 "2026-05-08T11:07:40Z")
Hi why does my lynx shunt configure the battery % incorrectly. I am constantly synchronisng the batteries to 100% when the batteries meet max power, i havent done this for a week now (because i wondered what would h… --- ## [Angezeigte Ladeverluste zwischen Laden und Entladen](https://community.victronenergy.com/t/angezeigte-ladeverluste-zwischen-laden-und-entladen/56945)
**Author:** [@trash-hunter](https://community.victronenergy.com/u/trash-hunter)\ **Replies:** 102\ **Last updated:** [30 April 2026 14:56 UTC](https://community.victronenergy.com/t/angezeigte-ladeverluste-zwischen-laden-und-entladen/56945 "2026-04-30T14:56:35Z")
Hallo zusammen, mir sind folgende Werte aufgefallen welche mir etwa Sorgen machen. Der Lynx Shunt zeigt über 30% Verluste zwischen Batterie Laden und Entladen. In Werten sind das zum Beispiel an einem Zyklus = 10KW aus… --- ## [DC Hall Sensor in Victron als DC generator einbinden](https://community.victronenergy.com/t/dc-hall-sensor-in-victron-als-dc-generator-einbinden/57062)
**Author:** [@Reddriver1980](https://community.victronenergy.com/u/Reddriver1980)\ **Replies:** 8\ **Last updated:** [27 April 2026 14:41 UTC](https://community.victronenergy.com/t/dc-hall-sensor-in-victron-als-dc-generator-einbinden/57062 "2026-04-27T14:41:40Z")
Hallo, ich habe ein Victron System in meinen Minivan verbaut. Multiplus+MPPT+Orion+Cerbo+Shunt nun möchte ich die Generatorleistung vom Fahrzeug zur Laderaumbatterie einzeln messen. Da der Orion nicht isoliert ist un… --- ## [Novizenfrage: Shunt oder nicht?](https://community.victronenergy.com/t/novizenfrage-shunt-oder-nicht/56567)
**Author:** [@manfred.krafczyk](https://community.victronenergy.com/u/manfred.krafczyk)\ **Replies:** 82\ **Last updated:** [26 April 2026 10:53 UTC](https://community.victronenergy.com/t/novizenfrage-shunt-oder-nicht/56567 "2026-04-26T10:53:01Z")
Hello everyone, I’m currently setting up my first Victron system (3 MP 6k5), 6x5 kWh Eco-Worthy batteries, etc., and I’m a bit confused about how to use a smart shunt. The wiring manual states that the supply cables fro… --- ## [Lowering self-consumption on Lynx Shunt + Cerbo GX system](https://community.victronenergy.com/t/lowering-self-consumption-on-lynx-shunt-cerbo-gx-system/55202)
**Author:** [@Gab24](https://community.victronenergy.com/u/Gab24)\ **Replies:** 5\ **Last updated:** [20 March 2026 14:26 UTC](https://community.victronenergy.com/t/lowering-self-consumption-on-lynx-shunt-cerbo-gx-system/55202 "2026-03-20T14:26:22Z")
Hello everyone, I am currently working on a weather station project that will be deployed in Greenland. To manage the battery system, I have selected several Victron Energy components, but I need some clarification rega… --- ## [Lynx shunt stuck in initialising mode](https://community.victronenergy.com/t/lynx-shunt-stuck-in-initialising-mode/55107)
**Author:** [@Stewart](https://community.victronenergy.com/u/Stewart)\ **Replies:** 0\ **Last updated:** [18 March 2026 13:32 UTC](https://community.victronenergy.com/t/lynx-shunt-stuck-in-initialising-mode/55107 "2026-03-18T13:32:54Z")
My Lynx shunt (2 yrs old) decided to go from soilid green led to flashing orange (firmware issue). I updated the Cerbo GX and the shunt, both confirmed updated successfully but it is now rapidly flashing green led ( Ini… --- ## [BMS1000 ang Lynx Shunt VE can - both needed to give accurate SOC?](https://community.victronenergy.com/t/bms1000-ang-lynx-shunt-ve-can-both-needed-to-give-accurate-soc/53320)
**Author:** [@MichaelGaarde](https://community.victronenergy.com/u/MichaelGaarde)\ **Replies:** 10\ **Last updated:** [14 February 2026 15:55 UTC](https://community.victronenergy.com/t/bms1000-ang-lynx-shunt-ve-can-both-needed-to-give-accurate-soc/53320 "2026-02-14T15:55:54Z")
out of necessity it had to upgrade to lithium in October - upon arrival in Greece i was recommend an electrician by the marina - short: he f#cked me over. Now i’m trying to make a proper setup. I have 5x300ah batteries… --- ## [Lynx shunt 1000 incorrect soc](https://community.victronenergy.com/t/lynx-shunt-1000-incorrect-soc/50870)
**Author:** [@ron\_h](https://community.victronenergy.com/u/ron_h)\ **Replies:** 26\ **Last updated:** [12 January 2026 21:11 UTC](https://community.victronenergy.com/t/lynx-shunt-1000-incorrect-soc/50870 "2026-01-12T21:11:32Z")
After 2 months of none top balancing the calculated SOC of mine lynx shunt 1000 is 10% off. Got a low battery alarm this morning but SOC still showed 10%. What is the correct procedure to adjust efficiency and peukert … --- ## [Manually setting the State-of-Charge (SoC) via Node-RED](https://community.victronenergy.com/t/manually-setting-the-state-of-charge-soc-via-node-red/51379)
**Author:** [@RichieS](https://community.victronenergy.com/u/RichieS)\ **Replies:** 8\ **Last updated:** [9 January 2026 13:26 UTC](https://community.victronenergy.com/t/manually-setting-the-state-of-charge-soc-via-node-red/51379 "2026-01-09T13:26:28Z")
Dear Community, My system has been running flawlessly for over three years, but last December I experienced problems with the battery state of charge (SoC) and voltage. Due to the three weeks of bad weather here in Vien… --- ## [Messgenauigkeit Lynx Shunt](https://community.victronenergy.com/t/messgenauigkeit-lynx-shunt/51253)
**Author:** [@dachauan](https://community.victronenergy.com/u/dachauan)\ **Replies:** 0\ **Last updated:** [7 January 2026 11:48 UTC](https://community.victronenergy.com/t/messgenauigkeit-lynx-shunt/51253 "2026-01-07T11:48:25Z")
Hallo zusammen, gibt es seitens Victron inzwischen irgendwo Angaben zur Messgenauigkeit des Lynx Shunts? Erreicht er die gleiche Auflösung und Messgenauigkeit des Smartshunts? Strom +/- 0,01A, +/- 0,4%, Spannung+/- 0,… --- ## [State-of-Charge (SoC) über NodeRed manuell einstellen](https://community.victronenergy.com/t/state-of-charge-soc-uber-nodered-manuell-einstellen/51030)
**Author:** [@RichieS](https://community.victronenergy.com/u/RichieS)\ **Replies:** 0\ **Last updated:** [2 January 2026 13:38 UTC](https://community.victronenergy.com/t/state-of-charge-soc-uber-nodered-manuell-einstellen/51030 "2026-01-02T13:38:45Z")
Liebe Community, meine Anlage läuft seit mehr als 3 Jahren problemlos, nur im vergangenen Dezember kam es zu Problemen mit dem Ladezustand der Batterien (SoC) bzw. mit der Batteriespannung. Aufgrund des schlechten Wette… --- ## [Lynx shunt Temperature sensor](https://community.victronenergy.com/t/lynx-shunt-temperature-sensor/50998)
**Author:** [@Sticky1](https://community.victronenergy.com/u/Sticky1)\ **Replies:** 2\ **Last updated:** [2 January 2026 00:33 UTC](https://community.victronenergy.com/t/lynx-shunt-temperature-sensor/50998 "2026-01-02T00:33:35Z")
New to Victron Searched forum…no results found can someone tell me where the temperature probe goes on the battery? Is it the positive terminal or the negative terminal? It doesn’t clarify that in the book and the man… --- ## [Lynx Shunt VE.Can 1000 – Voltage stuck at 0V after Battery Voltage Calibration](https://community.victronenergy.com/t/lynx-shunt-ve-can-1000-voltage-stuck-at-0v-after-battery-voltage-calibration/44903)
**Author:** [@andrewd](https://community.victronenergy.com/u/andrewd)\ **Replies:** 6\ **Last updated:** [31 December 2025 13:13 UTC](https://community.victronenergy.com/t/lynx-shunt-ve-can-1000-voltage-stuck-at-0v-after-battery-voltage-calibration/44903 "2025-12-31T13:13:44Z")
Hello, I am experiencing a critical issue with my Victron Lynx Shunt VE.Can 1000. After performing a Battery Voltage Calibration in VictronConnect, the voltage reading has become stuck at 0.00V. Since then, the shunt n… --- ## [Lynx shunt with battery on the right side](https://community.victronenergy.com/t/lynx-shunt-with-battery-on-the-right-side/50116)
**Author:** [@luphi](https://community.victronenergy.com/u/luphi)\ **Replies:** 2\ **Last updated:** [12 December 2025 14:23 UTC](https://community.victronenergy.com/t/lynx-shunt-with-battery-on-the-right-side/50116 "2025-12-12T14:23:35Z")
Hi community, I consider to update my lynx bus with a shunt, but that would end up with e battery on the right side of the shunt and the MPPTs and MPs on the left. The manual is telling the exact opposite :frowning: , … --- ## [No LEDs on Lynx. Busbar has power](https://community.victronenergy.com/t/no-leds-on-lynx-busbar-has-power/49837)
**Author:** [@toddster](https://community.victronenergy.com/u/toddster)\ **Replies:** 0\ **Last updated:** [5 December 2025 20:31 UTC](https://community.victronenergy.com/t/no-leds-on-lynx-busbar-has-power/49837 "2025-12-05T20:31:05Z")
I’m installing a new Lynx M10 busbar system. Power in, Shunt, Distributor, Distributor, Distributor. On initial start-up, with the big busbar link in the shunt, all the LEDs were lit as expected. (All green except two p… --- ## [Lynx SOC not capturing DC consumption?](https://community.victronenergy.com/t/lynx-soc-not-capturing-dc-consumption/49118)
**Author:** [@Anders](https://community.victronenergy.com/u/Anders)\ **Replies:** 10\ **Last updated:** [25 November 2025 16:18 UTC](https://community.victronenergy.com/t/lynx-soc-not-capturing-dc-consumption/49118 "2025-11-25T16:18:08Z")
I am running an off grid setup with: Cerbo GX MultiPlus-II 48/5000/70-50 Lynx Shunt 1000A VE.Can SmartSolar Charger MPPT 150/100 rev2 SmartShunt 500A - set as DC Energy Meter I have no separate BMS I am currently con… --- ## [Battery capacity in VRM wrong while SOC and consumption correct](https://community.victronenergy.com/t/battery-capacity-in-vrm-wrong-while-soc-and-consumption-correct/49117)
**Author:** [@juergen](https://community.victronenergy.com/u/juergen)\ **Replies:** 2\ **Last updated:** [22 November 2025 20:36 UTC](https://community.victronenergy.com/t/battery-capacity-in-vrm-wrong-while-soc-and-consumption-correct/49117 "2025-11-22T20:36:48Z")
Dear community, I have an installation with Cerbo-GX, 3 MP2, Lynx Shunt, multiple LiFePo4 batteries behind it (total approx. 1200Ah/60kWh). While the real-time data is correct incl. the SOC, remaining battery time, com… --- ## [Feature Request Cerbo GX \> Lynx Shunt \> Relais \> based on temperature](https://community.victronenergy.com/t/feature-request-cerbo-gx-lynx-shunt-relais-based-on-temperature/48391)
**Author:** [@wgk](https://community.victronenergy.com/u/wgk)\ **Replies:** 0\ **Last updated:** [8 November 2025 15:28 UTC](https://community.victronenergy.com/t/feature-request-cerbo-gx-lynx-shunt-relais-based-on-temperature/48391 "2025-11-08T15:28:44Z")
Unfortunately, the Lynx Shunt settings for the relay in the Cerbo do not currently support triggering based on a temperature range, which would be useful as it would eliminate the need to use a Cerbo temperature port and… --- ## [Reduktion des Eigenverbrauchs der Victron Anlage im Winter, bei kleiner PV-Anlage](https://community.victronenergy.com/t/reduktion-des-eigenverbrauchs-der-victron-anlage-im-winter-bei-kleiner-pv-anlage/47460)
**Author:** [@PV-Frank](https://community.victronenergy.com/u/PV-Frank)\ **Replies:** 10\ **Last updated:** [23 October 2025 08:20 UTC](https://community.victronenergy.com/t/reduktion-des-eigenverbrauchs-der-victron-anlage-im-winter-bei-kleiner-pv-anlage/47460 "2025-10-23T08:20:06Z")
Mit welchen einfachen Mitteln und gerne ohne zu programmieren, kann ich den Eigenverbrauch der Victronanlage im Winter reduzieren? Ich habe verstanden, dass mein 48V-Blei-Akku-System ein Effizienzkiller ist und ich habe… --- ## [Different voltages between different components](https://community.victronenergy.com/t/different-voltages-between-different-components/46172)
**Author:** [@jahooper](https://community.victronenergy.com/u/jahooper)\ **Replies:** 6\ **Last updated:** [16 October 2025 04:36 UTC](https://community.victronenergy.com/t/different-voltages-between-different-components/46172 "2025-10-16T04:36:25Z")
First time posting but I have an issue with the voltage readings on my system. 48/3000 Multiplus 2 - Connected with 50mm2 cables Lynx power in + Lynx Shunt + Lynx Distributor 250/85 Smart Solar Regulator - Connected wi… --- ## [Lynx shunt communications](https://community.victronenergy.com/t/lynx-shunt-communications/46053)
**Author:** [@Danielbuchhansen](https://community.victronenergy.com/u/Danielbuchhansen)\ **Replies:** 2\ **Last updated:** [15 October 2025 08:37 UTC](https://community.victronenergy.com/t/lynx-shunt-communications/46053 "2025-10-15T08:37:22Z")
Hello. I have a Lynx shunt and try to connect over VRM to look up the shunt settings, but it will not find it. I have communications between the cerbo gx and the shunt --- ## [Modifying powerin?](https://community.victronenergy.com/t/modifying-powerin/46993)
**Author:** [@mt17249](https://community.victronenergy.com/u/mt17249)\ **Replies:** 2\ **Last updated:** [14 October 2025 15:04 UTC](https://community.victronenergy.com/t/modifying-powerin/46993 "2025-10-14T15:04:42Z")
Newbie here, first setup for log in my work truck. Retrofitting from a lead acid setup that keeps boiling off. In the space those batteries were, is about an inch short of the width of the lynx powerin, shunt and distrib… --- ## [Why is the Lynx Shunt disliked so much?](https://community.victronenergy.com/t/why-is-the-lynx-shunt-disliked-so-much/46453)
**Author:** [@Grego77](https://community.victronenergy.com/u/Grego77)\ **Replies:** 4\ **Last updated:** [5 October 2025 21:51 UTC](https://community.victronenergy.com/t/why-is-the-lynx-shunt-disliked-so-much/46453 "2025-10-05T21:51:39Z")
Im constantly reading comments of the Lynx Shunt being useless and an expensive fuse holder. Is it because of my battery bank not being lithium and correct sized for my usage that im worried about not seeing 96.3% rather… --- ## [Lynx shunt 1000](https://community.victronenergy.com/t/lynx-shunt-1000/46118)
**Author:** [@DULA](https://community.victronenergy.com/u/DULA)\ **Replies:** 1\ **Last updated:** [28 September 2025 12:17 UTC](https://community.victronenergy.com/t/lynx-shunt-1000/46118 "2025-09-28T12:17:37Z")
hello i have a lynx 1000.the SOC for the batteries are always wrong and it keeps reporting wrong battery voltage and wrong charging KW too.have tried to disconnect it and reconnect back but still same problem,pls can an… --- ## [Starter Battery Always 0% in GX console screen](https://community.victronenergy.com/t/starter-battery-always-0-in-gx-console-screen/44982)
**Author:** [@Bah434x](https://community.victronenergy.com/u/Bah434x)\ **Replies:** 3\ **Last updated:** [9 September 2025 19:25 UTC](https://community.victronenergy.com/t/starter-battery-always-0-in-gx-console-screen/44982 "2025-09-09T19:25:31Z")
Starter Battery Always 0% in GX remote console screen or Android GX but works fine in the shunt and VRM dashboard. Is this a bug or a setting I’m missing? [Next page](https://community.victronenergy.com/tag/lynx-shunt/218.md?match_all_tags=true&page=1&tags%5B%5D=lynx_shunt)