# \#feed\_in

**URL:** https://community.victronenergy.com/tag/feed_in/125.md

[Latest](https://community.victronenergy.com/latest.md) · [Categories](https://community.victronenergy.com/categories.md) · [Tags](https://community.victronenergy.com/tags.md)

---

## [GRID Feed-in with DESS and battery at 100%](https://community.victronenergy.com/t/grid-feed-in-with-dess-and-battery-at-100/64002)

<div class="topic-metadata">

**Author:** [@KrAck](https://community.victronenergy.com/u/KrAck)\
**Replies:** 38\
**Last updated:** [17 November 2026 07:09 UTC](https://community.victronenergy.com/t/grid-feed-in-with-dess-and-battery-at-100/64002 "2026-11-17T07:09:59Z")

</div>

Hi, I’m a newbie and have the system now active for 1 week and really like its capabilities. This is my current setup: What I noticed is, that when my battery is at 100%, the system stops taking energy from the PV …

---

## [Multiplus 24V 800VA feed-in](https://community.victronenergy.com/t/multiplus-24v-800va-feed-in/63908)

<div class="topic-metadata">

**Author:** [@glushko.mikhail](https://community.victronenergy.com/u/glushko.mikhail)\
**Replies:** 7\
**Last updated:** [14 October 2026 11:41 UTC](https://community.victronenergy.com/t/multiplus-24v-800va-feed-in/63908 "2026-10-14T11:41:04Z")

</div>

A question for the experts: Is it possible to configure the Multiplus 24V 800VA to feed-in (feed energy back into the grid) without an additional GX device?

---

## [Section 9 EEG control with VE.Bus firmware version 555 and later](https://community.victronenergy.com/t/9-eeg-steuerung-mit-ve-bus-firmware-ab-version-555/38132)

<div class="topic-metadata">

**Author:** [@nick22](https://community.victronenergy.com/u/nick22)\
**Replies:** 27\
**Last updated:** [14 September 2026 17:42 UTC](https://community.victronenergy.com/t/9-eeg-steuerung-mit-ve-bus-firmware-ab-version-555/38132 "2026-09-14T17:42:47Z")

</div>

Hi everyone, we’re the happy owners of a three-phase system with three MultiPlus 3000s with two MPPTs and a Fronius Primo on AC-Out. Three Pylontech US5000 batteries are charged. The system is currently off-grid …

---

## [Keep batteries charged in (D)ESS mode stops injecting to the grid](https://community.victronenergy.com/t/keep-batteries-charged-in-d-ess-mode-stops-injecting-to-the-grid/59937)

<div class="topic-metadata">

**Author:** [@cbr](https://community.victronenergy.com/u/cbr)\
**Replies:** 1\
**Last updated:** [1 July 2026 14:26 UTC](https://community.victronenergy.com/t/keep-batteries-charged-in-d-ess-mode-stops-injecting-to-the-grid/59937 "2026-07-01T14:26:31Z")

</div>

When I set DESS to trade, have positive sell prices but set battery to ‘keep batteries charged’ (I do this because battery balancing is scheduled and I don’t want to stop the absorption phase when a cloud appears otherwi…

---

## [DC-coupled PV - feed in excess ping pongs between +/- 30 Amp every second](https://community.victronenergy.com/t/dc-coupled-pv-feed-in-excess-ping-pongs-between-30-amp-every-second/56421)

<div class="topic-metadata">

**Author:** [@Warzel](https://community.victronenergy.com/u/Warzel)\
**Replies:** 5\
**Last updated:** [12 April 2026 18:16 UTC](https://community.victronenergy.com/t/dc-coupled-pv-feed-in-excess-ping-pongs-between-30-amp-every-second/56421 "2026-04-12T18:16:34Z")

</div>

I have an Multiplus II GX and a battery with a JK BMS that controls the requested voltage via DVCC And i also have a DC-coupled MPPT 250/60 that follow this regime via an VE connection Futher i have enabled “DC-coupled…

---

## [Multiplus II disconnects often from grid due to overvoltages](https://community.victronenergy.com/t/multiplus-ii-disconnects-often-from-grid-due-to-overvoltages/6332)

<div class="topic-metadata">

**Author:** [@bbo](https://community.victronenergy.com/u/bbo)\
**Replies:** 6\
**Last updated:** [27 November 2025 01:54 UTC](https://community.victronenergy.com/t/multiplus-ii-disconnects-often-from-grid-due-to-overvoltages/6332 "2025-11-27T01:54:24Z")

</div>

Hello, I have an ESS system based on Cerbo GX, Multiplus 2 48/5000/70 230Vac and additional PV invertor Fronius Primo 5.0.1 (conencted to the AC OUT of the Multiplus). The batteries are 2x3.5KWh Pylontech. The excess ene…

---

## ["DC-coupled PV - feed in excess" discharging batteries](https://community.victronenergy.com/t/dc-coupled-pv-feed-in-excess-discharging-batteries/46907)

<div class="topic-metadata">

**Author:** [@akamc2](https://community.victronenergy.com/u/akamc2)\
**Replies:** 12\
**Last updated:** [12 October 2025 23:10 UTC](https://community.victronenergy.com/t/dc-coupled-pv-feed-in-excess-discharging-batteries/46907 "2025-10-12T23:10:18Z")

</div>

hello everyone I went from a Quattro 5000 to a Multiplus-II 10,000 firmware version is 558 (latest) I used to have DC feed in option enabled, so the SmartSolar would produce max energy during daytime , feeding the gr…

---

## [MPPTs stop producing at 100% SOC with feed-in enabled – battery cycling and high currents](https://community.victronenergy.com/t/mppts-stop-producing-at-100-soc-with-feed-in-enabled-battery-cycling-and-high-currents/39313)

<div class="topic-metadata">

**Author:** [@oliverT](https://community.victronenergy.com/u/oliverT)\
**Replies:** 17\
**Last updated:** [14 July 2025 16:29 UTC](https://community.victronenergy.com/t/mppts-stop-producing-at-100-soc-with-feed-in-enabled-battery-cycling-and-high-currents/39313 "2025-07-14T16:29:01Z")

</div>

Hi everyone, I’m having an issue with my Victron setup and I hope someone can help me understand what’s going on. I will attach a short video to illustrate the behaviour I’m seeing. System configuration: MPPT SmartSo…

---

## [Multiplus 2 Will Not Feed In](https://community.victronenergy.com/t/multiplus-2-will-not-feed-in/3648)

<div class="topic-metadata">

**Author:** [@stuartscott171](https://community.victronenergy.com/u/stuartscott171)\
**Replies:** 19\
**Last updated:** [27 June 2025 22:01 UTC](https://community.victronenergy.com/t/multiplus-2-will-not-feed-in/3648 "2025-06-27T22:01:31Z")

</div>

Just installed a MP2 grid tied, have setup ESS and works when the system grid tied solar is running. Maintains the net close to set point when charging batteries. Issue is the MP 2 will not export, have been over all se…

---

## [No changes with negative grid feed in](https://community.victronenergy.com/t/no-changes-with-negative-grid-feed-in/23711)

<div class="topic-metadata">

**Author:** [@MatzeL](https://community.victronenergy.com/u/MatzeL)\
**Replies:** 38\
**Last updated:** [17 June 2025 09:03 UTC](https://community.victronenergy.com/t/no-changes-with-negative-grid-feed-in/23711 "2025-06-17T09:03:58Z")

</div>

Hi, I’m using a three phase system with am EM540. I changed my Grid Set Point Up to actually -100W but If I look in the dashboard, there are time sequences with grid consumption up to 100W. What can I do? I’m u…

---

## [Short Charge Pulses in ESS on 3 phase Victron MultiPlus II 48/5000/70-50 Setup](https://community.victronenergy.com/t/short-charge-pulses-in-ess-on-3-phase-victron-multiplus-ii-48-5000-70-50-setup/31647)

<div class="topic-metadata">

**Author:** [@puetsch](https://community.victronenergy.com/u/puetsch)\
**Replies:** 0\
**Last updated:** [9 May 2025 09:01 UTC](https://community.victronenergy.com/t/short-charge-pulses-in-ess-on-3-phase-victron-multiplus-ii-48-5000-70-50-setup/31647 "2025-05-09T09:01:15Z")

</div>

I do have a 3-Phase Victron MultiPlus II 48/5000/70-50 Setup. During the Night in ESS-Mode, the setup executes short charge pulses - causing little grid feed in. During those times, Grid Meter Values in Victron show stab…

---

## [Solved - MultiPlus II not feeding in anymore](https://community.victronenergy.com/t/solved-multiplus-ii-not-feeding-in-anymore/22892)

<div class="topic-metadata">

**Author:** [@hermann4](https://community.victronenergy.com/u/hermann4)\
**Replies:** 8\
**Last updated:** [21 February 2025 11:02 UTC](https://community.victronenergy.com/t/solved-multiplus-ii-not-feeding-in-anymore/22892 "2025-02-21T11:02:01Z")

</div>

We have three MultiPlus II 48/5000/70-50 installed that are connected to normal 48V 100Ah lead acid batteries. The multiplus are being configured with ESS Assistant (external control). We control the grid set point wit…

---

## [Quattro grid feedback on both lines?](https://community.victronenergy.com/t/quattro-grid-feedback-on-both-lines/20481)

<div class="topic-metadata">

**Author:** [@Jan613](https://community.victronenergy.com/u/Jan613)\
**Replies:** 1\
**Last updated:** [31 January 2025 07:12 UTC](https://community.victronenergy.com/t/quattro-grid-feedback-on-both-lines/20481 "2025-01-31T07:12:46Z")

</div>

Hi, i am just wondering about a future project. If i would use a Quattro connected to the grid and a generator. Set up an ESS with a few Solar Panels and Batteries. In VE Config (Quattro Demo) i can set AC1 input to g…

---

## [Feed in problem](https://community.victronenergy.com/t/feed-in-problem/19096)

<div class="topic-metadata">

**Author:** [@Charbel](https://community.victronenergy.com/u/Charbel)\
**Replies:** 3\
**Last updated:** [18 January 2025 21:27 UTC](https://community.victronenergy.com/t/feed-in-problem/19096 "2025-01-18T21:27:44Z")

</div>

Hey everyone, I’m having an issue with my charge controllers. When the grid is available, the charging power goes up to 10kW but then gradually drops to zero. It’s not feeding in, even though the ESS feed-in for DC-coupl…

---

## [How to force maximum export](https://community.victronenergy.com/t/how-to-force-maximum-export/13203)

<div class="topic-metadata">

**Author:** [@kevdav100](https://community.victronenergy.com/u/kevdav100)\
**Replies:** 1\
**Last updated:** [26 November 2024 11:23 UTC](https://community.victronenergy.com/t/how-to-force-maximum-export/13203 "2024-11-26T11:23:43Z")

</div>

So I have set to export, but its only exporting a fraction of what my DNO has allowed, so how to force export to the maximum, I can export 5.1kW, is there a setting to set so the MP2 8000 exports the maximum ? Even when…

---

## [MPPT doesn't stop to charge after battery is fully charged](https://community.victronenergy.com/t/mppt-doesnt-stop-to-charge-after-battery-is-fully-charged/11066)

<div class="topic-metadata">

**Author:** [@gepd](https://community.victronenergy.com/u/gepd)\
**Replies:** 11\
**Last updated:** [19 November 2024 15:51 UTC](https://community.victronenergy.com/t/mppt-doesnt-stop-to-charge-after-battery-is-fully-charged/11066 "2024-11-19T15:51:41Z")

</div>

Hi, I have the following setup: 1 MultiPlus-II 1 SmartSolar MPPT 250/60 1 Dyness A48100 battery 1 Cerbo GX I have two problems, and I believe the first one is causing the second: When the battery is fully charged, …

---

## [Question about EM540 and feed-in with negative grid set point](https://community.victronenergy.com/t/question-about-em540-and-feed-in-with-negative-grid-set-point/1985)

<div class="topic-metadata">

**Author:** [@M4jkl](https://community.victronenergy.com/u/M4jkl)\
**Replies:** 5\
**Last updated:** [5 September 2024 07:28 UTC](https://community.victronenergy.com/t/question-about-em540-and-feed-in-with-negative-grid-set-point/1985 "2024-09-05T07:28:34Z")

</div>

Hello, I have three questions Is it worth setting the EM540 baud rate to higher than the default (9,6kbps) or the cerbo supports only (9,6kbps) ? Is it normal that the EM540 meter has bad data (consumption, export …
