# \#ac\_ignore

**URL:** https://community.victronenergy.com/tag/ac-ignore/143.md

[Latest](https://community.victronenergy.com/latest.md) · [Categories](https://community.victronenergy.com/categories.md) · [Tags](https://community.victronenergy.com/tags.md)

---

## [Ignore AC input to switch between critical load panel and grid](https://community.victronenergy.com/t/ignore-ac-input-to-switch-between-critical-load-panel-and-grid/64928)

<div class="topic-metadata">

**Author:** [@Trubornot](https://community.victronenergy.com/u/Trubornot)\
**Replies:** 1\
**Last updated:** [10 November 2026 05:02 UTC](https://community.victronenergy.com/t/ignore-ac-input-to-switch-between-critical-load-panel-and-grid/64928 "2026-11-10T05:02:50Z")

</div>

Goal is to power as much as I can on a critical loads panel throughout the day and then switch back to grid when the battery falls to 15% overnight Multiplus II 48/5000 120 USA Can Ignore AC input be used to automatica…

---

## [Using Virtual switch "Ignore AC input" - Change (Voltage/SOC-) Settings on GX screen (or node-red)](https://community.victronenergy.com/t/using-virtual-switch-ignore-ac-input-change-voltage-soc-settings-on-gx-screen-or-node-red/52998)

<div class="topic-metadata">

**Author:** [@Basti](https://community.victronenergy.com/u/Basti)\
**Replies:** 4\
**Last updated:** [8 February 2026 10:30 UTC](https://community.victronenergy.com/t/using-virtual-switch-ignore-ac-input-change-voltage-soc-settings-on-gx-screen-or-node-red/52998 "2026-02-08T10:30:28Z")

</div>

Hello. Virtual switch on Multiplus2 activated and configured as follows: Multiplus will ignore the grid until battery is below certain voltage or SOC (to have a certain power for backup). Multiplus will switch to the …

---

## [AC Ignore with assistants but also switch the programmable relay](https://community.victronenergy.com/t/ac-ignore-with-assistants-but-also-switch-the-programmable-relay/47865)

<div class="topic-metadata">

**Author:** [@basco](https://community.victronenergy.com/u/basco)\
**Replies:** 6\
**Last updated:** [30 October 2025 18:38 UTC](https://community.victronenergy.com/t/ac-ignore-with-assistants-but-also-switch-the-programmable-relay/47865 "2025-10-30T18:38:44Z")

</div>

Hi all, Would it be possible to also switch the programmable relay when using assistants to enable ac\_ignore? I understand that the general flag must be used to enable ignore ac, but then the programmable relay is not …

---

## [MPII not accepting other MPII on AC In](https://community.victronenergy.com/t/mpii-not-accepting-other-mpii-on-ac-in/46885)

<div class="topic-metadata">

**Author:** [@icgt](https://community.victronenergy.com/u/icgt)\
**Replies:** 3\
**Last updated:** [12 October 2025 16:01 UTC](https://community.victronenergy.com/t/mpii-not-accepting-other-mpii-on-ac-in/46885 "2025-10-12T16:01:26Z")

</div>

Dear Victron fans We’re stuck with a problem that I need help with. I hope you can give us some ideas. The existing three-phase system with Multiplus II 5kVA works fine for some years. The PV panels are all DC-coupled.…