Wind Speed anemometer recording on Cerbo GX

Hi, I’ve connected a 2 wire pulsed output anemometer to the digi in of a Cerbo GX. If I rotate the anemometer the Cerbo does recognise and count the signal input (after a delay) but I would like the wind speed to be quantified and recorded in meters per second m/s. Would anyone have a modification or any input as to how to achieve this please?

See images below.

The anemometer output is as follows:

Convert pulses to wind speed using the following formula: 1.1176 m/s per Hz (1 Hz = 1 pulse/second), 2.5 mph per Hz (1 Hz = 1 pulse/second)

Thanks in advance, Anthony