# Which Victron charge controller for Dokio 200W suitcase

**URL:** <https://community.victronenergy.com/t/which-victron-charge-controller-for-dokio-200w-suitcase/30722>\
**Category:** DIY\
**Tags:** mppt\_controllers, offgrid, diy\
**Created:** [1 May 2025 10:32 UTC](https://community.victronenergy.com/t/which-victron-charge-controller-for-dokio-200w-suitcase/30722 "2025-05-01T10:32:30Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![FBT](https://avatars.discourse-cdn.com/v4/letter/f/b9e5f3/32.png) [@FBT](https://community.victronenergy.com/u/FBT)\
**Post date:** [1 May 2025 10:32 UTC](https://community.victronenergy.com/t/which-victron-charge-controller-for-dokio-200w-suitcase/30722/1 "2025-05-01T10:32:30Z")

</div>

Dear all,

Would like some help choosing the right charge controller.

We have ordered a 200w solar suitcase from DOKIO.  
The FSP-200M

It comes with its own (cheap) charging controller but I would love to replace it with an higher end smart Victron MPPT one

The panel specs on DOKIO site state:

 ![IMG_0195](https://europe1.discourse-cdn.com/victron/original/3X/9/1/913d4dae6b6922bc7153ac151fbdcc3518e663e2.jpeg)

> **[FSP-200M - Jinhua Dokio Technology Co.,Ltd](http://www.dokiosolar.com/wap/product/show-3.html)**

If I put the panel specs in the victron MPPT sizing calculator , it doesn’t give any result.  
It goes wrong when I put the the Vmpp Value of 18v given by DOKIO it won’t suggests any.

> **[MPPT Calculator - Victron Energy](https://www.victronenergy.com/mppt-calculator)**
>
> MPPT Calculator - Victron Energy

I would like to buy the Victron Energy SmartSolar MPPT 100V 20a

Is this compatible or not?

Thanks a lot

---

<div class="post-metadata">

**Author:** ![water\_rat](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/water_rat/32/45_2.png) [@water\_rat](https://community.victronenergy.com/u/water_rat)\
**Post date:** [1 May 2025 11:10 UTC](https://community.victronenergy.com/t/which-victron-charge-controller-for-dokio-200w-suitcase/30722/2 "2025-05-01T11:10:32Z")

</div>

Victron recommends solar panels with 36 cell to ensure that the PV voltage exceeds the battery voltage by 5 volts. [PV array install](https://www.victronenergy.com/media/pg/Manual_SmartSolar_MPPT_75-10_up_to_100-20/en/installation.html#UUID-a02f8083-769b-b3b4-ab21-3c40c5814854)  
 ![Mppt 5 volt](https://europe1.discourse-cdn.com/victron/original/3X/b/e/be8b9961e1a5deac9c8548985105a74b8ecdf814.png)

The 75-15, or the 100-20 would be suitable.  
Just be aware that due to the low PV voltage / high battery voltage, the mppt might not always strat charging the battery.

---

<div class="post-metadata">

**Author:** ![FBT](https://avatars.discourse-cdn.com/v4/letter/f/b9e5f3/32.png) [@FBT](https://community.victronenergy.com/u/FBT)\
**Post date:** [1 May 2025 12:54 UTC](https://community.victronenergy.com/t/which-victron-charge-controller-for-dokio-200w-suitcase/30722/3 "2025-05-01T12:54:45Z")

</div>

Thanks a bunch, that explains a lot.

Do you think it’s still worthy portable combination or should we try to find another solar suitcase?  
This one had good reviews and price-quality/durability was excellent.

We want to use this setup:  
1 suitcase panel 200w (below 200€)  
victron 100/20 controller  
Victron 800/12 inverter  
And 100ah lifepo4 12 v
